

PE44820B X
ADALM-PLUTOとMCUを使ってパッシブレーダーアレイを作るプロジェクト。
- Size
- 49.2 × 82.9 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 69
- Nets
- 89
- Pads
- 328
- Tracks, vias
- 551, 1,071
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 May 2026
- Updated
- 27 Sep 2026
Overview
PE44820B X is an open-source printed circuit board by Nero-198, from the Nero-198/PLUTO_Phaser repository on GitHub. It is a 4-layer board of 49.2 × 82.9 mm with 69 parts on 89 nets, routed with 551 tracks and 1,071 vias.
It is built around the BGB 741L7ESD E6327, PE44820B-X and RP2040-ZERO, with the TPS7A2033PDQNR-TP among its other parts. Its parts include 18 capacitors, 14 resistors, 11 connectors, 10 ICs and 4 inductors. It belongs with the RP2040 boards of this library.
Main components
4BGB 741L7ESD E6327
DFN-7(1.3x2)DFN-7(1.3x2) RF Amplifiers ROHSInfineon TechnologiesRF AmplifiersPE44820B-X
QFN-32(5x5)-40℃~+105℃ 1.7GHz~2.2GHz 2.3V~5.5V、3.3V~5.5V Phase Shifter Radar QFN-32(5x5) RF Misc ICs and Modules ROHSpSemiRF Misc ICs And ModulesRP2040-ZERO
-- Development Boards & Kits ROHSWaveshareDevelopment Boards & KitsTPS7A2033PDQNR-TP
DFN-4(1x1)DFN-4(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICUncategorised
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R6, R7, R12, R13, R14 |
| 6 | Conn_Coaxial | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J5, J6, J7, J8, J9, J14 |
| 4 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C7, C8 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C18, C19 |
| 4 | 22n | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L2, L3, L4 |
| 4 | 33p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4, C5, C6 |
| 4 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2, J3, J11, J13 |
| 4 | Jumper_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP9, JP10, JP11, JP12 |
| 3 | 33 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13, C14 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C12 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10 |
| 2 | BGB_741L7ESD_E6327 | SamacSys_Parts:BGB741L7ESDE6327 | IC3, IC4 |
| 2 | PE4302-51 | SamacSys_Parts:QFN50P400X400X80-21N-D | IC2, IC6 |
| 2 | PE44820B-X | SamacSys_Parts:QFN50P500X500X90-33N-D | IC1, IC5 |
| 2 | SN74HC595NSR | SamacSys_Parts:SOIC127P780X200-16N | IC7, IC8 |
| 2 | jump A0 | Jumper:SolderJumper-3_P1.3mm_Bridged123_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP5 |
| 2 | jump A1 | Jumper:SolderJumper-3_P1.3mm_Bridged123_RoundedPad1.0x1.5mm_NumberLabels | JP2, JP6 |
| 2 | jump A2 | Jumper:SolderJumper-3_P1.3mm_Bridged123_RoundedPad1.0x1.5mm_NumberLabels | JP3, JP7 |
| 2 | jump A3 | Jumper:SolderJumper-3_P1.3mm_Bridged123_RoundedPad1.0x1.5mm_NumberLabels | JP4, JP8 |
| 2 | open or 3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J15 |
| 1 | RP2040-Zero | isw-kbd:RP2040-Zero-THT | U3 |
| 1 | TPS7A2033PDQNR | footprints:DQN0004A-MFG | U4 |
| 1 | dummper | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
More from Nero-198/PLUTO_Phaser
1- 4 layers49.2 × 82.9 mm

Similar boards
- 8 layers24 × 27.3 mm

- 4 layers127 × 101.6 mm

- 4 layers32 × 47 mm

- 2 layers29 × 27.7 mm

- 2 layers132.3 × 94.9 mm

- 2 layers321 × 92.3 mm

- 2 layers255.9 × 99.3 mm

Zerosprey42
beekeeb/zerosprey42
Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.
96 parts140 - 2 layers146.3 × 69.5 mm

Questions
How big is the PE44820B X PCB?
It measures 49.2 × 82.9 mm and has 4 copper layers, 1.58 mm thick.
What parts does the PE44820B X use?
69 parts, built around the BGB 741L7ESD E6327, PE44820B-X, RP2040-ZERO and TPS7A2033PDQNR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PE44820B X KiCad files?
From the Nero-198/PLUTO_Phaser repository on GitHub, at the commit this page was made from: the board is PE44820B-X/PE44820B-X.kicad_pcb and its schematic DIY_Passiv_IQ_Phase_Shifter_2ch/DIY_Passiv_IQ_Phase_Shifter_2ch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PE44820B X design in my own project?
Its repository states no licence, so its author keeps all rights: ask Nero-198 before reusing the design.