
Pixeldust
dhyans26/neoboard
I made this project as LEDs are fun and Neopixels sit right on the board in a flush, neat way. I wanted a project that can sit on my desk and look cool while being fun and interactive.

Art, code, and pcb for the AY26-27 NF, IEEE, CPES solder challenge!
NF SolderChallenge27 is an open-source printed circuit board by NerdFlare, from the NerdFlare/NF-SolderChallenge27 repository on GitHub. It is a 2-layer board of 62.5 × 63.8 mm with 22 parts on 23 nets, routed with 119 tracks and 20 vias.
It is built around the ATTINY1624-SSU, PS1240P02BT and SK6805E-J, with the SK6812 and SK6812MINI-E among its other parts. Its parts include 9 diodes, 6 resistors, 2 capacitors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | ATtiny1624-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Battery_Cell | NF-SolderChallenge27:BAT-SMD_BS-24-B4AK014 | BT1 |
| 1 | Conn_01x03_Pin | BadgeLife Favorites:UPDI_1x03_P2.54mm_SMT | J1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D3 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D6 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | PS1240P02BT | NF-SolderChallenge27:XTAL_PS1240P02BT_TDK | XTAL1 |
| 1 | R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | SK6805 | LED_SMD:LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D9 |
| 1 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D7 |
| 1 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D8 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645Sx43SMTR92 | SW1 |

dhyans26/neoboard
I made this project as LEDs are fun and Neopixels sit right on the board in a flush, neat way. I wanted a project that can sit on my desk and look cool while being fun and interactive.

TheBeachLab/alphabets
Open Source Mechanical Split Flap Display, AKA Solari display

KrystianD/avr-power-meter
AVR-based, galvanically isolated, bidirectional DC energy meter with Modbus RTU interface.

matty337s/Webasto-Heater-WBUS-Controller
Controller for webasto heater used in vehicles such as Land Rover Discovery 3. Used to turn on and off heater using ATTINY microcontroller, with inputs for USB, ignition and low-beam.


lepi-labs/1-synth-badge
ATTINY1624 powered PCB badge with light up eyes and horns

penayush-tronics/ATtinyStep
An ATtiny powered step counter and speed/distance measuring device that fits in the palm of your hand.

It measures 62.5 × 63.8 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the ATTINY1624-SSU, PS1240P02BT, SK6805E-J and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NerdFlare/NF-SolderChallenge27 repository on GitHub, at the commit this page was made from: the board is pcb/NF-SolderChallenge27.kicad_pcb and its schematic pcb/NF-SolderChallenge27.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NerdFlare before reusing the design.