Skip to the content
2 layersRobot, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
57
Pads
96
Tracks, vias
112, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
16 Feb 2025
Updated
17 Feb 2025

Overview

Robot is an open-source printed circuit board by Nemo-snil, from the Nemo-snil/robot-oleg repository on GitHub. It is a 2-layer board with 11 parts on 57 nets, routed with 112 tracks and 0 vias.

It is built around the BTS7960B. It belongs with the robots and motor control boards and the ESP32 boards of this library.

Main components

1

Parts

11
QtyValueFootprintReferences
1ANALOG INConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ5
1BTS7960Connector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_HorizontalJ9
1Conn_01x08_SocketConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ3
1DIGITAL PWM(~)Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_VerticalJ4
1ESP32 1Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_VerticalJ1
1ESP32 2Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_VerticalJ2
1I2CConnector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_HorizontalJ11
1Limit switchConnector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_HorizontalJ7
1Limit switch GNDConnector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_HorizontalJ8
1POWERConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ6
1PowerTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ10

Similar boards

  • 4 layers147.3 × 78.1 mmRC Car Design - Control On Board, the printed circuit board in 3D

    RC Car Design - Control On Board

    cjg-1/FPV-RC-CAR

    A wireless FPV control system for RC vehicles featuring real-time video transmission and custom embedded power management. Enables immersive first-person vehicle teleoperation with low-latency wireless architecture.

    51 parts2
  • 2 layers144 × 59.5 mmSteeringmodule, the printed circuit board in 3D

    Steeringmodule

    ZeniteSolar/MDE22

    Esse módulo tem como objetivo controlar a direção da rabeta da embarcação Guarapuvu II, da equipe Zênite Solar do IFSC.

    88 parts2
  • 2 layers83.6 × 107.3 mmShield stm2025, the printed circuit board in 3D

    Shield stm2025

    Rami-Troudi/Electrique-Eurobot-IEEE-INSAT-2026

    Repo for my electrical work for the Eurobot competition

    66 parts1
  • 2 layers118 × 84.5 mmHoloCade Driver Shield, the printed circuit board in 3D

    HoloCade Driver Shield

    scifiuiguy/HoloCade_Unreal

    HoloCade SDK for Unreal Engine - designed to streamline deployment of professional-grade multiplayer VR/AR/AI/Robotic LBE in venues using immersive theater actors, standardized large hydraulics for motion and haptics…

    78 parts1MIT
  • 2 layers108.2 × 124.9 mmSBC, the printed circuit board in 3D

    SBC

    ahmedsiddyq/mine_sweeper

    A software implementation of the classic Minesweeper game.

    373 parts
  • 2 layers120 × 100 mmCh bot, the printed circuit board in 3D

    Ch bot

    doabayomi/horizon-pcb

    PCB Design for the Horizon Controller Prototype (REV 1)

    271 parts

Questions

What parts does the Robot use?

11 parts, built around the BTS7960B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Robot KiCad files?

From the Nemo-snil/robot-oleg repository on GitHub, at the commit this page was made from: the board is kicad/Robot.kicad_pcb and its schematic kicad/Robot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Robot design in my own project?

Its repository states no licence, so its author keeps all rights: ask Nemo-snil before reusing the design.