4 layers123.2 × 50.2 mm
I2c BTS7960
abzman/modular-i2c-board-set
boards designed to be used together to create a modular control system
128 parts1Unlicense
2 layers
Btd7960 dcmotor driver rev1
ShuBot/BTS7960_DC_Motor_Driver1BTS7960 DC_Motor_Driver
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 44
- Pads
- 111
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 May 2023
- Updated
- 2 May 2023
Overview
Btd7960 dcmotor driver rev1 is an open-source printed circuit board by ShuBot, from the ShuBot/BTS7960_DC_Motor_Driver repository on GitHub, published under the MIT licence. It is a 2-layer board with 20 parts on 44 nets.
It is built around the 74AHC244D, ESP-WROOM-32D and BTS7960B, with the TS-1101-C-W among its other parts. Its parts include 10 resistors, 4 ICs and 3 capacitors. It belongs with the robots and motor control boards of this library.
Main components
4
74AHC244D
SO-20-300mil-40℃~+125℃ 10.5ns@5V,50pF 2V~5.5V 74AHC 8 80uA 8mA 8mA Schmitt trigger Tri-State SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/Transceiver
ESP-WROOM-32D
-- WiFi Modules ROHSMIWiFi ModulesBTS7960B
TO-263-7-40℃~+150℃ 1us 1us 5.5V~27.5V 7uA Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge MOSFET TO-263-7 Gate Drivers ROHSInfineon TechnologiesGate Drivers
TS-1101-C-W
SMD,6x3.6mm-30℃~+85℃ 12V 2.5mm 2.6N 3.6mm 50,000 cycles 50mA 6mm No Rectangular Button SPST Surface Mount,Vertical Without Bracket SMD,6x3.6mm Tactile Switches ROHSXKB ConnectionTactile Switches
README
README.mdBTS7960_DC_Motor_Driver
BTS7960 DC_Motor_Driver
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k/R0603 | Resistor_SMD:R_0603_1608Metric | R1, R2, R4, R5, R6, R7, R8, R9 |
| 2 | BTS7960B | shubot_lib:DPAK127P1490X440-8N | U3, U4 |
| 2 | TS-1101-C-W | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | BOOT1, RST1 |
| 1 | 100nF/50V/C0603 | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10k/R0603 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10uF/C0603 | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1uF/10V/10%/X5R/C0603 | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 74AHC244 | Package_SO:SO-20_12.8x7.5mm_P1.27mm | U1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | PROG1 |
| 1 | ESP-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | NA/R0603 | Resistor_SMD:R_0603_1608Metric | R10 |
Similar boards
- 4 layers144.3 × 143.8 mm
- 2 layers76 × 70 mm
Dc motor
Luchao90/dc-motor-control-PCB
This work is realize in context of "pcb design" course from embedded system career FIUBA 2020, for NOVOTEC company.
64 parts2 - 4 layers125.1 × 118.6 mm
- 6 layers40 × 60 mm
Asic
roshan0282/ttsky-asic-rayforge
Tiny Tapeout is an educational project that aims to make it easier and cheaper than ever to get your digital and analog designs manufactured on a real chip.
86 partsApache-2.0 - 4 layers115.5 × 66 mm
- 2 layers368.3 × 90.8 mm
- 2 layers99.1 × 99.1 mm
Questions
What parts does the Btd7960 dcmotor driver rev1 use?
20 parts, built around the 74AHC244D, ESP-WROOM-32D, BTS7960B and TS-1101-C-W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Btd7960 dcmotor driver rev1 KiCad files?
From the ShuBot/BTS7960_DC_Motor_Driver repository on GitHub, at the commit this page was made from: the board is hardware/btd7960_dcmotor_driver_rev1/btd7960_dcmotor_driver_rev1.kicad_pcb and its schematic hardware/btd7960_dcmotor_driver_rev1/btd7960_dcmotor_driver_rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Btd7960 dcmotor driver rev1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).