
QMKCM2
xeno3dev/QMKCM2
QMKCM2 is a QMK/ESP Powered Macropad inspired by the Work Louder Creator Micro 2

Omni Pad is a compact 3×4 macropad PCB with 12 MX-compatible keys, two push-capable rotary encoders, and addressable RGB underglow.
Macropad v3 is an open-source printed circuit board by neilmenon13, from the neilmenon13/omnipad_v4 repository on GitHub. It is a 2-layer board of 81 × 81 mm with 41 parts on 43 nets, routed with 232 tracks and 40 vias.
It is built around the WS2812B and PEC11R-4215F-S0024. Its parts include 16 diodes, 14 switches, 4 capacitors and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Omni Pad is a compact 3×4 macropad PCB with 12 MX-compatible keys, two push-capable rotary encoders, and addressable RGB underglow. It is built around an RP2040 Zero and is intended for custom shortcuts, media controls, editing workflows, and other keyboard automation.
Hardware revision: The KiCad design and manufacturing outputs are named
macropad_v3, while this repository is theomnipad_v4project.
.
├── BOM.csv Component list and sourcing metadata
├── models/
│ ├── Upper Case.stl 3D-printable top case
│ └── Bottom Case.stl 3D-printable bottom case
└── pcb/
├── kicad/
│ ├── macropad_v3.kicad_pro KiCad project
│ ├── macropad_v3.kicad_sch Schematic
│ └── macropad_v3.kicad_pcb PCB layout
└── gerber/ Gerber archive for manufacturing
└── gerbers.zip PCB manufacturing ZIPThe complete component list is available in BOM.csv. The main electrical components are:
| Part | Quantity | Notes |
|---|---|---|
| MX-compatible switches | 12 | MX_Solder_1.00u footprint |
| Switch diodes | 12 | SOD-123 footprint |
| PEC11R-4215F-S0024 encoders | 2 | Rotary encoder with integrated push switch |
| WS2812B LEDs | 4 | Addressable RGB underglow |
| RP2040 Zero | 1 | Main controller |
| Capacitors | 4 | 0805 hand-solder footprint |
Check the schematic, footprint assignments, and manufacturer datasheets before ordering parts. The BOM is the source of truth for the current design revision.
Open pcb/kicad/macropad_v3.kicad_pro with KiCad. Use the schematic to review the switch matrix, encoder connections, RP2040 Zero pin assignments, power, and WS2812B LED chain before fabrication.
Download the manufacturing archive at pcb/gerber/gerbers.zip. The ZIP contains:
macropad_v3-Edge_Cuts.gbr)If your manufacturer supports it, upload the complete ZIP as-is so the layer and drill files stay together.
A typical assembly order is:
The matching case parts are in models/. Print Upper Case.stl and Bottom Case.stl, then test-fit the PCB before final assembly. Confirm dimensions and mounting hardware against the case before committing to the final print.
This repository currently contains the hardware design, manufacturing files, BOM, and case models. It does not include keyboard firmware or a keymap.
After assembly, the RP2040 Zero will need firmware configured for the 3×4 key matrix, both rotary encoders, their push switches, and the WS2812B underglow chain. A firmware project such as QMK or KMK can be used to map the keys and encoder functions.
Omni Pad is a hardware design project. Review the schematic and PCB carefully, verify the BOM with your preferred suppliers, and perform an electrical inspection before powering a freshly assembled board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | ~ | ScottoKeebs_Scotto:MX_Solder_1.00u | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12 |
| 12 | ~ | ScottoKeebs_Components:Diode_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 6 | MountingScrew | MountingHole:MountingHole_2.2mm_Tight | H1, H2, H3, H4, H5, H6 |
| 4 | C | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D13, D14, D15, D16 |
| 2 | PEC11R-4215F-S0024 | digikey-footprints:Rotary_Encoder_Switched_PEC11R | S13, S14 |
| 1 | RP2040_Zero | LKBD_MCU:MCU_RP2040-Zero_SMD | U2 |

xeno3dev/QMKCM2
QMKCM2 is a QMK/ESP Powered Macropad inspired by the Work Louder Creator Micro 2


RyanChomistek/PCPanelClone
To install go to releases and download and run the installer

plinkysynth/plinky_public
a public release of the plinky sw and hw

theohg/PD240W
PD240W is a complete hardware and firmware project converting USB-C Power Delivery into a programmable 240W (48V 5A) bench power supply, featuring C++ code for Raspberry Pi Pico, custom PCB Gerbers, and a 3D-printable…


Jrodna/OrthoCode
Ortholinear keyboard with thumb clusters and a rotary encoder designed with all THT components and regular keysets.

FlightDeckDIY/G1000-NXi-Mega
Welcome to the G1000 NXi Mega project! This repository contains the schematic and PCB design files for a custom-built G1000 avionics panel, designed specifically for use with flight simulators like Microsoft Flight…
It measures 81 × 81 mm and has 2 copper layers, 1.6 mm thick.
41 parts, built around the WS2812B and PEC11R-4215F-S0024. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the neilmenon13/omnipad_v4 repository on GitHub, at the commit this page was made from: the board is pcb/kicad/macropad_v3.kicad_pcb and its schematic pcb/kicad/macropad_v3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask neilmenon13 before reusing the design.