Skip to the content
2 layers60 × 66.5 mmArduino adapter, the printed circuit board in 3D

System for reading/writing temperature sensors

Size
60 × 66.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
31
Pads
86
Tracks, vias
155, 5
Pours
2
Routed
Yes
KiCad
KiCad 3
Created
16 Jun 2014
Updated
17 Sep 2014

Overview

Arduino adapter is an open-source printed circuit board by nEDM-TUM, from the nEDM-TUM/Temperature-Sensor-System repository on GitHub. It is a 2-layer board of 60 × 66.5 mm with 15 parts on 31 nets, routed with 155 tracks and 5 vias.

Its parts include 11 connectors, 3 resistors and 1 diode. It belongs with the sensors and measurement and interfaces and adapters boards of this library.

README

README.md

Temperature-Sensor-System

Sensor network system built for the nEDM experiment.

Features

  • Both temperature and humidity sensors can be connected at any sensor socket. The sensor type will be automatically detected.
  • High temperature and humidity accuracy: Temperature sensors are calibrated to ±0.1K and the humidity sensors to ±1.8%rH.
  • A high number of connected sensors is supported. Currently 44 sensors are in use, however the system is designed to support at least 100 sensors and still be able to fulfill a sampling rate of 1Hz. If the sampling rate is allowed to be slower, up to 960 sensors are possible to share one Ethernet connection.
  • The system supports a fast sample rate of at least 1Hz.
  • We achieved a relatively low cost per sensor. The cost per sensor module is mostly defined by the sensor chip alone, which is about e7 for a precision temperature sensor and about e20 for a high quality humidity sensor. The cost for the printed circuit board and required components is less than e4 per board.
  • Measurement results can be forwarded via TCP/IP to a CouchDB server, which is able to record the measurement data from all connected sensors.
  • The sensor network provides a TCP/telnet user interface, for controlling and viewing of network parameters. This allows easy configuring and debugging of the system.
  • Most of the system parameters like sampling rate or database IP addresses and insert functions are configurable at runtime.
  • Plug and Play is supported for adding and removing sensors or even control units during runtime.

Directory structure

text
.
+-- casings     // 3D CAD files for 3D printer
|   +-- adapter
|   +-- arduino
|   +-- cable_clamp
|   +-- collector
|   +-- humidity
|   +-- temperature
+-- circuit_boards      // Circuit schematic diagram and 
|   |                   // PCB schematic files created using KiCad
|   +-- 3x127_254_adapter       // A PCB chip adapter, 
|   |                           // used for breadboard debugging
|   +-- 4x127_254_adapter       // A PCB chip adapter, 
|   |                           // used for breadboard debugging
|   +-- arduino_adapter
|   +-- humidity
|   +-- kicad_library           // Footprint and Component
|   |                           // library files for KiCad
|   +-- order           // PCB assembly, which was sent to 
|   |                   // Fischer Leiterplatten for production
|   +-- sensor_board
|   +-- so8_breakout    // A PCB chip adapter, 
|   |                   // used for breadboard debugging
|   +-- temperature_board

Tips for developers

  • To prevent EEPROM from being corrupted on power cycles, the AVR integrated brownout detection should be enabled.
  • To allow EEPROM storage to stay intact after reprogramming, set the corresponding fuse bit.
  • As Arduino fuses are not possible to be programmed via the default Arduino programmer (using the Arduino boot loader), we removed the boot loader and use the ISP connector for programming.
  • To not overload the voltage regulator, especially when driving multiple boards one should consider, that a significant portion of power is used to drive LEDs. So turning the LEDs off during normal operation will prevent overheating.
  • When debugging and programming devices of the sensor network, one has to be very careful, to not provide different power sources, as this might cause unexpected results, which can lead to damage of the sensor network, as well as connected computers. By default the USBasp programmer provides the system with 5V power.
  • Our makefiles currently do not support automatic detection of file dependencies, and source files to be compiled. All source files have to be specified explicitly and if changes to header files are made, a ’make clean’ should be performed before compiling the program.
  • Be careful, when using the USART line or similar for generating debugging output. Transmitting debugging information takes relatively long time and might influence the system heavily, especially, when debugging timing critical code. LEDs or GPIO pins with an oscilloscope provide a faster but more complex way for debugging.

###For more details about our project, please read the report document. ### Its tex file and needed images can be found in the folder report. You can use make to compile the document.

Parts

15
QtyValueFootprintReferences
4CONN_8Stiftleiste_8x1P1, P4, P9, P11
22k2SM0603_bigR2, R3
2CONN_10Stiftleiste_10x1P8, P10
2CONN_6Stiftleiste_6x1P2, P3
1150SM0805_bigR1
1LEDSM0603_bigD1
1POWStiftleiste_2x1P5
1TWIwannenstecker_2x3_rm254P6
1TWI_POWwannenstecker_2x3_rm254P7

More from nEDM-TUM/Temperature-Sensor-System

8
  • 2 layers200 × 330 mmNewOrder, the printed circuit board in 3D

    NewOrder

    nEDM-TUM/Temperature-Sensor-System

    System for reading/writing temperature sensors

    658 parts
  • 2 layers200 × 164.9 mmOrder4 notent, the printed circuit board in 3D

    Order4 notent

    nEDM-TUM/Temperature-Sensor-System

    System for reading/writing temperature sensors

    306 parts
  • 2 layers65 × 137 mmSensor board, the printed circuit board in 3D

    Sensor board

    nEDM-TUM/Temperature-Sensor-System

    System for reading/writing temperature sensors

    99 parts
  • 2 layers100 × 20 mmHumidity board, the printed circuit board in 3D

    Humidity board

    nEDM-TUM/Temperature-Sensor-System

    System for reading/writing temperature sensors

    25 parts
  • 2 layers20 × 76 mmTemperature board, the printed circuit board in 3D

    Temperature board

    nEDM-TUM/Temperature-Sensor-System

    System for reading/writing temperature sensors

    13 parts
  • 2 layers15.7 × 10.7 mmSo8 breakout, the printed circuit board in 3D

    So8 breakout

    nEDM-TUM/Temperature-Sensor-System

    System for reading/writing temperature sensors

    3 parts
  • 2 layers9.9 × 8.1 mm3x127 254 adapter, the printed circuit board in 3D

    3x127 254 adapter

    nEDM-TUM/Temperature-Sensor-System

    System for reading/writing temperature sensors

    2 parts
  • 2 layers8.1 × 10.7 mm4x127 254 adapter, the printed circuit board in 3D

    4x127 254 adapter

    nEDM-TUM/Temperature-Sensor-System

    System for reading/writing temperature sensors

    2 parts

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Arduino adapter PCB?

It measures 60 × 66.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Arduino adapter use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Arduino adapter KiCad files?

From the nEDM-TUM/Temperature-Sensor-System repository on GitHub, at the commit this page was made from: the board is circuit_boards/arduino_adapter/main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Arduino adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask nEDM-TUM before reusing the design.