

Xt prototyping board
XT Prototyping Board
- Size
- 194.3 × 93.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 59
- Pads
- 1,685
- Tracks, vias
- 176, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jan 2021
- Updated
- 18 Dec 2021
Overview
Xt prototyping board is an open-source printed circuit board by necroware, from the necroware/xt-prototyping-board repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 194.3 × 93.3 mm with 58 parts on 59 nets, routed with 176 tracks and 3 vias.
README
README.mdXT Prototyping Board
This board can be used to make prototypes for XT (8-bit ISA) slots.

Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | V1, V2, V3, V4, V5 |
| 2 | Conn_01x31 | Connector_PinHeader_2.54mm:PinHeader_1x31_P2.54mm_Vertical | A1, B1 |
| 1 | Bus_ISA_8bit | necroware:ISA_8BIT_EDGE | I1 |
The 8 most common of 58 parts.
Similar boards
- 2 layers252.9 × 77.6 mm

- 2 layers50 × 50 mm

- 2 layers97.3 × 71 mm

ZynScreen v1.5
zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
58 parts156 - 2 layers34 × 46 mm

- 2 layers148 × 81 mm

Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT - 2 layers53.3 × 36.3 mm

- 2 layers70 × 30.3 mm

Pico 2HP Audio
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
58 parts84 - 2 layers35.7 × 34.2 mm

Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
58 parts81MIT
Questions
How big is the Xt prototyping board PCB?
It measures 194.3 × 93.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Xt prototyping board use?
58 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xt prototyping board KiCad files?
From the necroware/xt-prototyping-board repository on GitHub, at the commit this page was made from: the board is kicad/xt-prototyping-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xt prototyping board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).