nebisman/UNDCMotor1This is the control of a DC motor through IoT
DCmotorCircuit is an open-source printed circuit board by nebisman, from the nebisman/UNDCMotor repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 53.3 mm with 20 parts on 38 nets, routed with 159 tracks and 1 via.
It is built around the DRV8833PW and WS2812B. Its parts include 7 connectors, 5 resistors, 3 capacitors, 1 IC and 1 diode.
This is the control of a DC motor through IoT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 2 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | REF1, REF2 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | DRV8833 | DCmotor:drv8833module | U1 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | LF | MountingHole:MountingHole_5mm_Pad_TopOnly | P2 |
| 1 | MotorConnector | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J5 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | UN | MountingHole:MountingHole_5mm_Pad_TopOnly | P1 |
| 1 | WS2812B | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1 |
RoboticsBrno/Robutek
Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.
retrobuiltRyan/4x4_Rover_ESP32
1:10 scale robot Rover with ESP32 and PS4 controller. Custom PCB for multi channel motor control
electromotif208/pcb-portfolio
👨💻 Electronics Engineer 📺 YouTube: ELECTROMOTIF 🔧 Tools: KiCad, EasyEDA 📡 Domains: Power Supply, ESP32, IoT, Embedded Hardware
CWRUbotix/Micromouse-2023-24
A fully autonomous maze-solving not-quite-mouse-sized robot.
FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique
empriselab/mote
A low cost, high confidence mobile robot optimized for education.
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the DRV8833PW and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nebisman/UNDCMotor repository on GitHub, at the commit this page was made from: the board is SchematicLayout/DCmotorCircuit.kicad_pcb and its schematic SchematicLayout/DCmotorCircuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
