
Motionsense interposer
nchie/MotionSense
Hardware mod for the DualSense controller to improve its gyroscope specs and features

Hardware mod for the DualSense controller to improve its gyroscope specs and features
Motionsense is an open-source printed circuit board by nchie, from the nchie/MotionSense repository on GitHub. It is a 4-layer board of 30 × 24 mm with 66 parts on 74 nets, routed with 475 tracks and 101 vias.
It is built around the ABM8-272-T3, FH34SRJ-4S-0.5SH(50) and TC2030-IDC-NL. Its parts include 29 capacitors, 11 resistors, 5 ICs, 3 connectors and 1 diode. It belongs with the RP2350 boards of this library.
Install KiKit: https://yaqwsx.github.io/KiKit/latest/panelization/intro/
Replace parameters and run:
kikit panelize \
--layout 'grid; rows: 1; cols: 1; space: 6mm' \
--tabs 'fixed; width: 3mm; vcount: 2' \
--cuts vcuts \
--framing 'tightframe; width: 5mm; space: 3mm; ' \
--post 'millradius: 1mm' \
-p :jlcVcuts motionsense.kicad_pcb motionsense_panelled.kicad_pcb| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C8, C11, C12, C13, C14, C15, C16, C17, C18, C19, C24, C28, C31 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R6, R7 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C2, C20, C21 |
| 3 | 33 | Resistor_SMD:R_0402_1005Metric | R1, R5, R9 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R4, R8 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C22, C25 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C23, C27 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R2, R11 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C9, C10 |
| 2 | 4.7u | ProjectLibrary:C_0402_1005Metric_small_pads | C6, C7 |
| 2 | TDK-ICM-42688-P | ProjectLibrary:TDK_ICM-42688-P-LGA-14_L3.0-W2.5-P0.50-TL | U4, U5 |
| 1 | 1 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | 10 | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 10pin_FFC-FPC_connector | ProjectLibrary:Hirose_FH34SRJ-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal_Imported | J1 |
| 1 | 11 | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | 12 | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | 13 | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | 14 | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | 2 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 22u, 10v | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 3 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | 3.3u | ProjectLibrary:L_pol_2016 | L1 |
| 1 | 4 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 5 | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | 6 | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | 7 | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | 8 | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | 9 | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AT42QT1010-TSHR | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | FH34SRJ-4S-0.5SH | ProjectLibrary:Hirose_FH34SRJ-4S-0.5SH-1x4-1MP-P0.50mm_Horizontal | FPC2 |
| 1 | LP5910-1.8DRVT | ProjectLibrary:LP5910-1.8DRVT-WSON-6_L2.0-W2.0-P0.65-BL-EP | U2 |
| 1 | ROHM CSL1901MW1 | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | RP2350_60QFN | ProjectLibrary:RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | SM03B-SRSS-TB (DNP) | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J4 |
| 1 | TC2030-IDC-NL | ProjectLibrary:TC2030-IDC-NL | J2 |

nchie/MotionSense
Hardware mod for the DualSense controller to improve its gyroscope specs and features

nchie/MotionSense
Hardware mod for the DualSense controller to improve its gyroscope specs and features

bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro




OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

bitaxeorg/BitaxeGT
Bitaxe Gamma Turbo 2x BM1370 ASIC ESP32 powered Bitcoin miner

rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!

keebio/quefrency-rev1-pcb
Quefrency Rev. 1 Keyboard PCB =============================
It measures 30 × 24 mm and has 4 copper layers, 1 mm thick.
66 parts, built around the ABM8-272-T3, FH34SRJ-4S-0.5SH(50) and TC2030-IDC-NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nchie/MotionSense repository on GitHub, at the commit this page was made from: the board is kicad/motionsense/motionsense.kicad_pcb and its schematic kicad/captouch-electrode/captouch-electrode.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nchie before reusing the design.