
Quefrency left macro
keebio/quefrency-rev1-pcb
Quefrency Rev. 1 Keyboard PCB =============================

Quefrency Rev. 1 Keyboard PCB =============================
Quefrency right-65 is an open-source printed circuit board by keebio, from the keebio/quefrency-rev1-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 178.6 × 99.4 mm with 162 parts on 63 nets, routed with 670 tracks and 36 vias.
It is built around the TC2030-IDC-NL. Its parts include 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Files are provided as-is, as I haven't fully had the chance to clean everything up. The working name of the Quefrency was Spectrogram, hence some of the files being marked with that name.
If anyone wants to clean things up, go ahead and submit a PR. Thanks!
These files are released under the MIT License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | D | Keebio-Parts:Diode-Hybrid-Back | D_A1, D_A2, D_A3, D_A4, D_A5, D_A6, D_A7, D_A8, D_A9, D_B1, D_B2, D_B3, D_B4, D_B5, D_B6, D_B7 +26 |
| 38 | SW_Push | MX_Alps_Hybrid:MX-1U-NoLED | SW_A1, SW_A2, SW_A3, SW_A4, SW_A5, SW_A6, SW_A7, SW_A9, SW_AB8, SW_B1, SW_B2, SW_B3, SW_B4, SW_B5, SW_B6, SW_B7 +22 |
| 7 | Hole | Mounting_Holes:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4, H5, H6, H6 |
| 5 | SW_Push | MX_Alps_Hybrid:MX-1.25U-NoLED | SW_E4, SW_E5, SW_E7, SW_E8, SW_EB1 |
| 2 | LOGO | Keebio-Art:Keebio-small | G***, G*** |
| 2 | SW_Push | MX_Alps_Hybrid:MX-1.5U-NoLED | SW_B8, SW_E2 |
| 2 | SW_Push | MX_Alps_Hybrid:MX-1.75U-NoLED | SW_DB7, SW_DC6 |
| 1 | Extra Data | Keebio-Parts:SinglePad | TP6 |
| 1 | GND | Keebio-Parts:SinglePad | TP3 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro-ZigZag | U2 |
| 1 | RGB | Keebio-Parts:SinglePad | TP4 |
| 1 | Reset | Keebio-Parts:SW_Tactile_SPST_Angled_MJTP1117 | SW_R1 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-2.75U-NoLED | SW_D7 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-2U-ReversedStabilizers-NoLED | SW_A8 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-2.25U-NoLED | SW_C8 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-2.75U-ReversedStabilizers-NoLED | SW_E1 |
| 1 | TC2030-IDC | Tag-Connect:TC2030-NL_SMALL | P1 |
| 1 | TRRS | Keebio-Parts:TRRS-PJ-320A | U1 |
| 1 | VCC | Keebio-Parts:SinglePad | TP1 |
The 110 most common of 162 parts.

keebio/quefrency-rev1-pcb
Quefrency Rev. 1 Keyboard PCB =============================

bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro




OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

bitaxeorg/BitaxeGT
Bitaxe Gamma Turbo 2x BM1370 ASIC ESP32 powered Bitcoin miner

rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!

It measures 178.6 × 99.4 mm and has 2 copper layers, 1.6 mm thick.
162 parts, built around the TC2030-IDC-NL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the keebio/quefrency-rev1-pcb repository on GitHub, at the commit this page was made from: the board is quefrency-right-65/quefrency-right-65.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).