
Motionsense
nchie/MotionSense
Hardware mod for the DualSense controller to improve its gyroscope specs and features

Hardware mod for the DualSense controller to improve its gyroscope specs and features
Captouch electrode is an open-source printed circuit board by nchie, from the nchie/MotionSense repository on GitHub. It is a 2-layer board of 2.6 × 96.1 mm with 2 parts on 3 nets, routed with 11 tracks and 0 vias.
Its parts include 1 IC and 1 connector.
Install KiKit: https://yaqwsx.github.io/KiKit/latest/panelization/intro/
Replace parameters and run:
kikit panelize \
--layout 'grid; rows: 1; cols: 1; space: 6mm' \
--tabs 'fixed; width: 3mm; vcount: 2' \
--cuts vcuts \
--framing 'tightframe; width: 5mm; space: 3mm; ' \
--post 'millradius: 1mm' \
-p :jlcVcuts motionsense.kicad_pcb motionsense_panelled.kicad_pcb| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x04 | ProjectLibrary:FH34SRJ-4S-FPC | J1 |
| 1 | Endpoint | ProjectLibrary:ElectrodePad_20x20mm | U1 |

nchie/MotionSense
Hardware mod for the DualSense controller to improve its gyroscope specs and features

nchie/MotionSense
Hardware mod for the DualSense controller to improve its gyroscope specs and features

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 2.6 × 96.1 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nchie/MotionSense repository on GitHub, at the commit this page was made from: the board is kicad/captouch-electrode/captouch-electrode.kicad_pcb and its schematic kicad/captouch-electrode/captouch-electrode.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nchie before reusing the design.