Skip to the content
2 layers70.2 × 46.7 mmRemote, the printed circuit board in 3D
Size
70.2 × 46.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
37
Pads
108
Tracks, vias
221, 18
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
6 Dec 2023
Updated
30 Apr 2024

Overview

Remote is an open-source printed circuit board by nathancritchfield, from the nathancritchfield/senior_project repository on GitHub. It is a 2-layer board of 70.2 × 46.7 mm with 40 parts on 37 nets, routed with 221 tracks and 18 vias.

It is built around the AP2210N-3.3TRG1, B2B-XH-A and EG1218, with the LTST-C190GKT, M20-9990246 and TL1105BF160Q among its other parts. Its parts include 15 ICs, 7 resistors, 6 capacitors, 4 connectors and 3 diodes. It belongs with the STM32 boards of this library.

Main components

6

Parts

40
QtyValueFootprintReferences
54u7Power_:CAPC1608X90NC1, C2, C3, C4, C5
3, ,
2250Power_:RESC1608X55NR2, R3
25.1kPower_:RESC1608X50NR6, R7
2GNDMCU_:Wire_ViaU7, U9
1100nMCU_:CAPC1005X55NC6
1120MCU_:RESC2012X65NR4
14.7kPower_:RESC1005X40NR5
15kPower_:RESC3116X65NR1
161300511121MCU_:CONN5_0511121_WREJ3
1ADCMCU_:Wire_ViaU5
1AP2210N-3.3TRG1Power_:SOT95P280X145-3NU2
1B2B-XH-APower_:JST_B2B-XH-AJ2
1BLMCU_:Wire_ViaU15
1CLKMCU_:Wire_ViaU11
1CSMCU_:Wire_ViaU12
1ChargingMCU_:0603D4
1DCMCU_:Wire_ViaU13
1DINMCU_:Wire_ViaU10
1EG1218Power_:SW_EG1218S1
1LTST-C190GKTMCU_:LEDC1608X35ND3
1M20-9990246MCU_:CONN2_M20-999_1x2_HRWJ4
1MCP73831T-2DCI_OTPower_:SOT95P270X145-5NU1
1NRF24L01_BreakoutRF_Module:nRF24L01_BreakoutU4
1RSTMCU_:Wire_ViaU14
1ReadyMCU_:LEDC1608X35ND1
1STM32G030F6PxPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU3
1TL1105BF160QMCU_:SW_TL1105BF160QS2
1USB4125-GF-A_REVA2Power_:GCT_USB4125-GF-A_REVA2J1
1VCCMCU_:Wire_ViaU8
1VDDMCU_:Wire_ViaU6

More from nathancritchfield/senior_project

2
  • 4 layers104.8 × 114.2 mmVESC-6-MK5, the printed circuit board in 3D

    VESC-6-MK5

    nathancritchfield/senior_project

    154 parts
  • 2 layers38.5 × 35.7 mmReceiver KiCad, the printed circuit board in 3D

    Receiver KiCad

    nathancritchfield/senior_project

    15 parts

Similar boards

  • 2 layers281.6 × 255.2 mmSynthia, the printed circuit board in 3D

    Synthia

    Engineering-House/Project-Synthia

    The programs used are as follows: - STMCube32MX - Visual Studio Code - STM32CubeIDE for Visual Studio Code (Extension Pack)

    236 parts
  • 2 layers48 × 74 mmZigbeeTemperaturReaderHW, the printed circuit board in 3D

    ZigbeeTemperaturReaderHW

    jwillner/ZigbeeTemperaturReaderHW

    Batteriebetriebener Zigbee-Sensor für die Wand. Er misst mit zwei DS18B20-Fühlern die Vorlauf- und Rücklauftemperatur einer Heizung, zeigt sie auf einem kleinen OLED-Display an und meldet sie per Zigbee an Home…

    16 parts
  • 2 layers95 × 27 mmCardbot Controller, the printed circuit board in 3D

    Cardbot Controller

    makr-group/cardbot

    Cardbots are simple and fun cardboard based robots! Great for kids age 10 and up.

    6 partsCC-BY-SA-4.0
  • 4 layers81 × 80 mmBreakout, the printed circuit board in 3D

    Breakout

    nischayhegde/jetson_spi_to_can_x8_breakout

    A PCB board for expanding the SPI channels on Jetson Orin nano super into 8 CANfd channels. Comes with chip select logic and jetpack drivers. Supports 1Mbit per CAN channel.

    145 parts1
  • 2 layers25.7 × 44.8 mmTelemetryComputer, the printed circuit board in 3D

    TelemetryComputer

    BerkeleyBikeBuilders/TelemetryComputer

    FW and HW for full suspension telemetry data logger

    23 partsApache-2.0
  • 2 layers34.3 × 36.6 mmUSB HubSwitch, the printed circuit board in 3D

    USB HubSwitch

    peteEH/usbHub-2host-1device

    Single Device can be switched between two hosts

    27 parts
  • 2 layers81.8 × 93 mmMicromouse Project 5, the printed circuit board in 3D

    Micromouse Project 5

    bennyman334/Micromouse-2025

    PCB + Schematic for UCLA IEEE Micromouse

    69 parts
  • 4 layers46.4 × 99.8 mmTrimix Analyzer, the printed circuit board in 3D

    Trimix Analyzer

    magnus188/aegir

    Open-source ESP32-P4 trimix analyzer prototype for technical diving,

    171 parts14

Questions

How big is the Remote PCB?

It measures 70.2 × 46.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Remote use?

40 parts, built around the AP2210N-3.3TRG1, B2B-XH-A, EG1218 and LTST-C190GKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Remote KiCad files?

From the nathancritchfield/senior_project repository on GitHub, at the commit this page was made from: the board is Hardware/Remote_KiCad/Remote.kicad_pcb and its schematic Hardware/Receiver_KiCad/MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Remote design in my own project?

Its repository states no licence, so its author keeps all rights: ask nathancritchfield before reusing the design.