Skip to the content
2 layersMcu datalogger, the printed circuit board in 3D

mcu-datalogger

Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
113
Pads
117
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
9 Sep 2024
Updated
11 Sep 2024

Overview

Mcu datalogger is an open-source printed circuit board by nathan5280, from the nathan5280/mcu-datalogger repository on GitHub. It is a 2-layer board with 29 parts on 113 nets.

It is built around the ATMEGA328-AU, 24LC1025-I/P and DS1337S+T&R. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

3

Parts

29
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3, H4
310KResistor_SMD:R_0805_2012MetricR1, R2, R6
222pFCapacitor_SMD:C_0805_2012MetricC3, C4
224LC1025Package_SO:SOIC-8_5.23x5.23mm_P1.27mmU1, U3
2330Resistor_SMD:R_0805_2012MetricR3, R7
24.7KResistor_SMD:R_0805_2012MetricR4, R5
2Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J2
2LEDLED_SMD:LED_0805_2012MetricD1, D2
10.1uFCapacitor_SMD:C_0805_2012MetricC1
1100nFCapacitor_SMD:C_0805_2012MetricC5
116MHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSolderingY2
11uFCapacitor_SMD:C_0805_2012MetricC2
132.768 KHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSolderingY1
1ATMEGA328-AUfootprints:ATMEGA328-AUU4
1BatteryConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
1Conn_01x09_PinConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ3
1Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ4
1DS1337S+T&Rfootprints:DS1337SU2

Similar boards

  • 2 layers50.8 × 30.5 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    djtaotao/MCU-Datalogger

    29 parts
  • 2 layers50.2 × 31.2 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    futureshocked/KLP4e_MCU-Datalogger

    This is the repository for the "MCU Datalogger" project.

    31 parts138MIT
  • 2 layers42.7 × 24.4 mmBACEE, the printed circuit board in 3D

    BACEE

    futureshocked/KicadLikeAPro-Project-3-BACEE

    This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.

    20 parts19MIT
  • 4 layers49.3 × 34.1 mmDattalogger Board, the printed circuit board in 3D

    Dattalogger Board

    DevMajed/DataLogger-Board

    Hardware PCB Design for AVR-based Datalogger using KiCAD

    30 parts4
  • 2 layers41.4 × 27.7 mmDuinoClone, the printed circuit board in 3D

    DuinoClone

    ARHollisSr/DuinoClone

    Arduino Clone with extended EEPROM

    20 parts1MIT
  • 4 layers49 × 27.9 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    elCowboyLuigi/MCU_datalogger_project_study

    This is a PCB project of a MCU Datalogger with EEPROM and Clock from section 11 of PCB Design with Kicad course for use as a learning experience

    31 parts1

Questions

What parts does the Mcu datalogger use?

29 parts, built around the ATMEGA328-AU, 24LC1025-I/P and DS1337S+T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mcu datalogger KiCad files?

From the nathan5280/mcu-datalogger repository on GitHub, at the commit this page was made from: the board is mcu-datalogger.kicad_pcb and its schematic connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mcu datalogger design in my own project?

Its repository states no licence, so its author keeps all rights: ask nathan5280 before reusing the design.