

Mcu datalogger
mcu-datalogger
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 113
- Pads
- 117
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Sep 2024
- Updated
- 11 Sep 2024
Overview
Mcu datalogger is an open-source printed circuit board by nathan5280, from the nathan5280/mcu-datalogger repository on GitHub. It is a 2-layer board with 29 parts on 113 nets.
It is built around the ATMEGA328-AU, 24LC1025-I/P and DS1337S+T&R. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)24LC1025-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROMDS1337S+T&R
SOIC-8-40℃~+85℃ 1.8V~5.5V 100nA 150uA External I2C Programmable clock output、Alarm function Yes SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time Clocks
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R6 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 24LC1025 | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1, U3 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R3, R7 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 32.768 KHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | ATMEGA328-AU | footprints:ATMEGA328-AU | U4 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | DS1337S+T&R | footprints:DS1337S | U2 |
Similar boards
- 2 layers50.8 × 30.5 mm

- 2 layers50.8 × 30.5 mm

- 2 layers50.2 × 31.2 mm

MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers42.7 × 24.4 mm

BACEE
futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.
20 parts19MIT - 4 layers49.3 × 34.1 mm

Dattalogger Board
DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD
30 parts4 - 2 layers55.7 × 37.2 mm

- 2 layers41.4 × 27.7 mm

- 4 layers49 × 27.9 mm

MCU Datalogger
elCowboyLuigi/MCU_datalogger_project_study
This is a PCB project of a MCU Datalogger with EEPROM and Clock from section 11 of PCB Design with Kicad course for use as a learning experience
31 parts1
Questions
What parts does the Mcu datalogger use?
29 parts, built around the ATMEGA328-AU, 24LC1025-I/P and DS1337S+T&R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mcu datalogger KiCad files?
From the nathan5280/mcu-datalogger repository on GitHub, at the commit this page was made from: the board is mcu-datalogger.kicad_pcb and its schematic connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mcu datalogger design in my own project?
Its repository states no licence, so its author keeps all rights: ask nathan5280 before reusing the design.