
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

KiCAD project for violin/viola piezo project
Vppreamp is an open-source printed circuit board by natebliton, from the natebliton/pickup-preamp repository on GitHub. It is a 2-layer board with 27 parts on 24 nets, routed with 75 tracks and 0 vias.
It is built around the TL072. Its parts include 7 resistors, 5 capacitors, 3 diodes, 3 connectors and 1 IC.
KiCAD project for violin/viola piezo project
I primarily use a Kremona pickup for my viola, and initially designed a preamp to work with that.
I also have a backup instrument that instead has a fishman pickup that requires a "high impedance preamp". So, the next step is to either make another preamp that works for that, or to modify the initial design in order to have adjustable input impedance (hopefully the latter).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4, R5, R7 |
| 4 | 33uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C3, C4, C5 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 100n | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | Cin1 |
| 1 | 100ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | VR1 |
| 1 | 10n | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | Cf1 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | Rf1 |
| 1 | 220n | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C2 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 9V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | 9V1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | InJack | NateLibrary:StereoJackTRS3 | InJack1 |
| 1 | Input | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D5.0mm | LED1 |
| 1 | On | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | OutJack | NateLibrary:StereoJackTRS3 | OutJack1 |
| 1 | Output | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
27 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the natebliton/pickup-preamp repository on GitHub, at the commit this page was made from: the board is vppreamp/vppreamp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask natebliton before reusing the design.