2 layers121 × 75.5 mm
Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5
2 layers62.8 × 85 mm
PCBALL
Nasyifaamf11/PCBALL- Size
- 62.8 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 51
- Pads
- 149
- Tracks, vias
- 488, 55
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Sep 2025
- Updated
- 17 Sep 2025
Overview
PCBALL is an open-source printed circuit board by Nasyifaamf11, from the Nasyifaamf11/PCBALL repository on GitHub. It is a 2-layer board of 62.8 × 85 mm with 36 parts on 51 nets, routed with 488 tracks and 55 vias.
It is built around the D882 and SS34. Its parts include 12 resistors, 4 transistors, 3 diodes, 2 fuses and 1 capacitor.
Main components
2Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10 K | Resistor_SMD:R_0805_2012Metric | R4, R6, R8, R9, R10 |
| 4 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | BATERAI1, JACKDC1, LED1, switch1 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric | R7, R12 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R5, R11 |
| 2 | D882 | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q5 |
| 2 | Fuse | PCBALL:FUSC6125X279N | F1, F2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1N007 | PCBALL:SODFL3818X130N | D2 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | Conn_02x13_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_Vertical | IDC1 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | Rapberry1 |
| 1 | D_Zener_Filled | Diode_SMD:D_MiniMELF | D3 |
| 1 | MDD3752 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | Q_NMOS_DGS | Package_TO_SOT_SMD:SOT-23-3 | Q3 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | R | Resistor_SMD:R_2512_6332Metric | R2 |
| 1 | SS34 | PCBALL:SODFL3818X130N | D1 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23-8 | U1 |
| 1 | ~ | TPS61088:TPS61088 | STEPUP2 |
| 1 | ~ | PCBALL:mp1584EN1 | STEPDOWN2 |
The 32 most common of 36 parts.
Questions
How big is the PCBALL PCB?
It measures 62.8 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCBALL use?
36 parts, built around the D882 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCBALL KiCad files?
From the Nasyifaamf11/PCBALL repository on GitHub, at the commit this page was made from: the board is PCBALL.kicad_pcb and its schematic PCBALLnew.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCBALL design in my own project?
Its repository states no licence, so its author keeps all rights: ask Nasyifaamf11 before reusing the design.
Similar boards
- 2 layers124 × 90 mm
- 2 layers193 × 110 mm
- 2 layers177 × 91.6 mm
Power Charg AUTO 12V C
Aleksei327/STM32G474-Power-Charger
Experimental STM32G474-based high-current battery charger and programmable synchronous buck converter. KiCad hardware and STM32CubeIDE firmware.
160 parts3 - 4 layers99 × 93 mm
Piezo driver
cyntem/piezo_driver_stm32
3-axis PCB and schematics High Voltage Piezo actuator driver with 2 Step motor driver and optional blue-ray microscope (just for test)
280 parts - 2 layers
- 2 layers120.7 × 57.1 mm
- 2 layers
Small-7
NVlabs/Cypress
Cypress is a scalable, GPU-accelerated PCB placement method inspired by VLSI. It incorporates tailored cost functions, constraint handling, and optimized techniques adapted for PCB layouts.
52 parts56Apache-2.0