2 layers55.7 × 55.7 mm
2 layers47 × 38.7 mm
Winder
nasu8151/-2--- Size
- 47 × 38.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 28
- Pads
- 138
- Tracks, vias
- 248, 54
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Sep 2025
- Updated
- 26 Sep 2025
Overview
Winder is an open-source printed circuit board by nasu8151, from the nasu8151/-2-- repository on GitHub. It is a 2-layer board of 47 × 38.7 mm with 34 parts on 28 nets, routed with 248 tracks and 54 vias.
It is built around the ESP32-C3-WROOM-02-H4, MAX3485ED and RS485, with the TB67H450FNG and BSS138 among its other parts. Its parts include 10 resistors, 8 connectors, 5 capacitors, 4 ICs and 2 transistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MAX3485ED
SOP-8-40℃~+85℃ 1 1 10Mbps 1mA 3.135V~3.465V 32 Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTC Korea TAEJIN TechRS-485 / RS-422 ICsRS485
SOP-81 1 1.2mA 2.5Mbps 256 5V Half-Duplex Transceiver ±4kV SOP-8 RS-485 / RS-422 ICs ROHSGRRS-485 / RS-422 ICsTB67H450FNG
SOP-8_EP_150milSOP-8-EP New Arrivals ROHSToshibaUncategorised
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdファイルの配置
- kouni_UFOcatcher_main : 中央制御用プログラム
- kouni_UFOcatcher_moter : 巻き上げ機用プログラム
- ufo : アーム部分の基板データ
- winder : 巻き上げ機部分の基板データ
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R7, R8, R9, R10 |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | RS485 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J7 |
| 2 | SW_Push | Library:SKRPABE010 | SW1, SW2 |
| 1 | 0.1Ω | Resistor_SMD:R_2512_6332Metric | R4 |
| 1 | 0.33u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 470u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3 |
| 1 | 7.5k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | Encoder | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | MAX3485 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Motor | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | NJM2845DL1 | Package_TO_SOT_SMD:TO-252-2 | U2 |
| 1 | Power | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Status | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | TB67H450FNG | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm | U3 |
| 1 | UART | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | USB | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
Questions
How big is the Winder PCB?
It measures 47 × 38.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Winder use?
34 parts, built around the ESP32-C3-WROOM-02-H4, MAX3485ED, RS485 and TB67H450FNG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Winder KiCad files?
From the nasu8151/-2-- repository on GitHub, at the commit this page was made from: the board is winder/winder.kicad_pcb and its schematic ufo/ufo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Winder design in my own project?
Its repository states no licence, so its author keeps all rights: ask nasu8151 before reusing the design.
More from nasu8151/-2--
2- 2 layers70 × 70 mm
Similar boards
- 2 layers139.9 × 85.8 mm
Pas hw
NGOQUOC98/ESP32_MODBUS_PCB_MASTER
This project was in development phase - we will remove this remark after release
198 parts1 - 2 layers90 × 60 mm
- 2 layers
- 2 layers45 × 42 mm
- 2 layers32 × 36 mm
- 2 layers100 × 100 mm
Explorer
anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.
266 parts100 - 2 layers62 × 73.7 mm
DoorBirdPico
fraxinas/DoorBirdPico
A custom Raspberry Pi Pico PCB design and code to add functionality to the DoorBird Voip entryphone.
42 parts4 - 4 layers54 × 100 mm
Oxrs black 004
austinscreations/Oxrs-Black
a custom rack controller that is based of the rack32 but includes some upgrades and major changes
92 parts1GPL-3.0