

- Size
- 55.7 × 55.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 23
- Pads
- 57
- Tracks, vias
- 73, 30
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Sep 2025
- Updated
- 26 Sep 2025
Overview
Ufo is an open-source printed circuit board by nasu8151, from the nasu8151/-2-- repository on GitHub. It is a 2-layer board of 55.7 × 55.7 mm with 13 parts on 23 nets, routed with 73 tracks and 30 vias.
It is built around the OKL-T/6-W12N-C and WS2812B. Its parts include 4 resistors, 3 capacitors, 3 connectors, 1 IC and 1 diode. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2OKL-T/6-W12N-C
SMD,12.2x12.2mm1 12.2mm 12.2mm 20mVp-p 300uF 30W 4.5V~14V 591mV~5.5V 600kHz 6A 7.2mm 93% Short Circuit Protection、Over Current Protection、Under Voltage Protection、Over-temperature protection、Automatic fault recovery、Power-on timing control SMD,12.2x12.2mm DC-DC Power Modules ROHSMurataIsolated Power ModulesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdファイルの配置
- kouni_UFOcatcher_main : 中央制御用プログラム
- kouni_UFOcatcher_moter : 巻き上げ機用プログラム
- ufo : アーム部分の基板データ
- winder : 巻き上げ機部分の基板データ
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 430 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 910 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | Battery | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | MOUDLE-SEEEDUINO-XIAO-ESP32C3 | xiao ESP32C3_PCB:MOUDLE14P-SMD-2.54-21X17.8MM | U1 |
| 1 | OKL-T_6-W12N-C | OKL-T-6:MURATA_OKL-T-6-W12N-C_0 | MD1 |
| 1 | Servo1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | Servo2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
More from nasu8151/-2--
2- 2 layers47 × 38.7 mm

- 2 layers70 × 70 mm

Similar boards
- 2 layers110 × 176 mm

- 2 layers80 × 100 mm

- 2 layers55 × 58 mm

- 2 layers95.5 × 50 mm

- 2 layers72 × 47 mm

- 2 layers70 × 76 mm

- 2 layers84 × 114 mm

- 2 layers95.9 × 83.8 mm

Questions
How big is the Ufo PCB?
It measures 55.7 × 55.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ufo use?
13 parts, built around the OKL-T/6-W12N-C and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ufo KiCad files?
From the nasu8151/-2-- repository on GitHub, at the commit this page was made from: the board is ufo/ufo.kicad_pcb and its schematic ufo/ufo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ufo design in my own project?
Its repository states no licence, so its author keeps all rights: ask nasu8151 before reusing the design.