
WEASEL KiCad
joebmz98/Weasel-West-Coast-Synthesiser
Digital east coast style synth heavily inspired by the Buchla Easel based on the Daisy Seed.

NoisyBoi
NoisyBoi is an open-source printed circuit board by NanashiTheNameless, from the NanashiTheNameless/NoisyBoi repository on GitHub. It is a 2-layer board of 85 × 82.5 mm with 36 parts on 15 nets, routed with 43 tracks and 0 vias.
It is built around the OPA2134UA, 100UF25V and PK0608-220MB. Its parts include 6 capacitors, 4 resistors, 2 inductors and 1 IC.
NoisyBoi
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | TestPoint | Connector_Pin:Pin_D1.3mm_L11.0mm_LooseFit | GND1, GND2, GNDIN1, NEG1, OUT1, OUT2, POS1 |
| 4 | 2.2uF_0603_25V | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C5, C6 |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | MPBL1, MPBR1, MPTL1, MPTR1 |
| 2 | 100uF_25V | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C3, C4 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 3296W-1-105_C118944 | easyeda2kicad:RES-ADJ-TH_3P-L10.0-W10.0-P2.50-BL-BS | R3, R4 |
| 2 | G*** | kibuzzard-691D6399 | kibuzzard-691D6399, kibuzzard-691D6399 |
| 2 | G*** | kibuzzard-691D6368 | kibuzzard-691D6368, kibuzzard-691D6368 |
| 2 | G*** | kibuzzard-691D6378 | kibuzzard-691D6378, kibuzzard-691D6378 |
| 2 | G*** | kibuzzard-691D639E | kibuzzard-691D639E, kibuzzard-691D639E |
| 2 | PK0608-220MB | easyeda2kicad:IND-TH_BD7.0-P2.50-D0.7 | L1, L2 |
| 1 | G*** | kibuzzard-691D6DA0 | kibuzzard-691D6DA0 |
| 1 | G*** | kibuzzard-691D6E02 | kibuzzard-691D6E02 |
| 1 | G*** | kibuzzard-691D6DA7 | kibuzzard-691D6DA7 |
| 1 | G*** | kibuzzard-691D6DFD | kibuzzard-691D6DFD |
| 1 | OPA2134UA | PCM_Package_SO_AKL:SO-8_3.9x4.9mm_P1.27mm | U1 |

joebmz98/Weasel-West-Coast-Synthesiser
Digital east coast style synth heavily inspired by the Buchla Easel based on the Daisy Seed.

umasme/2025-2026
University of Miami ASME Official Repository for NASA Lunabotics Challenge

krauser01/portafolio-electronica-eric-rv
Portafolio Proyectos de Electrónica Ing. Eric Rodriguez Vasquez

BreathOfHope/Respirator-2
Respirator-2 takes the knowledge we gained in building the RespiratorApparatus to build a production ready version, that can be manufactured in an industrial setting.




Narawit-Intusub/BoadV1
ในทางกายภาพ Slave อาจรับไฟต่อผ่านขั้วแม่เหล็กของบอร์ดก่อนหน้า แต่เน็ต +5VBUS และ GND ของทุกบอร์ดยังเป็นการต่อแบบขนาน ไม่ใช่อนุกรม
It measures 85 × 82.5 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the OPA2134UA, 100UF25V and PK0608-220MB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NanashiTheNameless/NoisyBoi repository on GitHub, at the commit this page was made from: the board is NoisyBoi.kicad_pcb and its schematic NoisyBoi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NanashiTheNameless before reusing the design.