

GR26-1
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 68
- Pads
- 230
- Tracks, vias
- 345, 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jul 2025
- Updated
- 16 Sep 2025
Overview
GR26-1 is an open-source printed circuit board by Nakazoto, from the Nakazoto/Data620 repository on GitHub. It is a 2-layer board with 68 parts on 68 nets, routed with 345 tracks and 4 vias.
Its parts include 32 resistors, 16 diodes, 12 transistors, 5 capacitors and 1 IC.
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Germanium | Diode_THT:D_A-405_P12.70mm_Horizontal | D1, D3, D4, D7, D8, D10, D12, D14, D15 |
| 6 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R7, R10, R23, R26, R27, R32 |
| 6 | S1005 | Diode_THT:D_A-405_P12.70mm_Horizontal | D2, D5, D6, D9, D11, D13 |
| 6 | S1007 | Package_TO_SOT_THT:TO-5-3 | Q1, Q3, Q7, Q9, Q10, Q11 |
| 5 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R4, R8, R14, R21, R29 |
| 4 | 3k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R5, R6, R12, R31 |
| 3 | 18k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R2, R13, R25 |
| 3 | 2N1304 | Package_TO_SOT_THT:TO-5-3 | Q2, Q4, Q5 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R3, R11 |
| 2 | 2.2uF 20V | Capacitor_THT:C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal | C1, C3 |
| 2 | 2k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R9, R19 |
| 2 | 39k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R28, R30 |
| 2 | 60uF | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C4, C5 |
| 2 | PNP | Package_TO_SOT_THT:TO-5-3 | Q6, Q8 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R24 |
| 1 | 10nF 100V | Capacitor_THT:C_Axial_L12.0mm_D6.5mm_P15.00mm_Horizontal | C2 |
| 1 | 20k? | Potentiometer_THT:Potentiometer_Bourns_3009Y_Horizontal | RV1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R22 |
| 1 | 3.9k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R18 |
| 1 | 5.1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 1 | 500 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R15 |
| 1 | 6.8k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R17 |
| 1 | 69k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R20 |
| 1 | 74M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | A1007 | Package_TO_SOT_THT:TO-5-3 | Q12 |
| 1 | D_Small | Diode_THT:D_DO-34_SOD68_P12.70mm_Horizontal | D16 |
| 1 | RLIC-12D | MS01:RLIC-12D | U1 |
| 1 | ~ | Logi620:ELCO 40 | J1 |
More from Nakazoto/Data620
12- 2 layers105.8 × 128.5 mm

- 2 layers105.8 × 128.5 mm

- 2 layers

- 2 layers109.4 × 132.8 mm

- 2 layers

- 2 layers107.3 × 130.2 mm

- 2 layers107.3 × 130.2 mm

- 2 layers107.3 × 130.2 mm

- 2 layers107.2 × 130 mm

- 2 layers

- 2 layers107.1 × 130.1 mm

- 2 layers107.3 × 130.2 mm

Similar boards
- 2 layers110 × 90 mm

- 2 layers100 × 57 mm

- 2 layers243.6 × 104.8 mm

- 2 layers100 × 35 mm

ArduI2CKeyboard
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
68 parts282 - 2 layers58 × 65 mm

- 2 layers98 × 38 mm

Bldc control ver3
pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller
68 parts199GPL-2.0 - 2 layers203.2 × 149.9 mm

- 2 layers347 × 156.5 mm

OF1 v1
GregTurbo/Open-Frame1
An open-source rectangle hardware project for smash, prioritizing ease of assembly and cost
68 parts120GPL-3.0
Questions
What parts does the GR26-1 use?
68 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GR26-1 KiCad files?
From the Nakazoto/Data620 repository on GitHub, at the commit this page was made from: the board is Schematics/Reverse Engineering/GR26-1/GR26-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GR26-1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Nakazoto before reusing the design.