Skip to the content
2 layersPlaca, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
34
Pads
50
Tracks, vias
82, 2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Apr 2025
Updated
26 May 2026

Overview

Placa is an open-source printed circuit board by nahucvc, from the nahucvc/Tejada repository on GitHub. It is a 2-layer board with 4 parts on 34 nets, routed with 82 tracks and 2 vias.

It is built around the WIZ850IO. Its parts include 1 capacitor, 1 IC and 1 connector. It belongs with the ESP32 boards of this library.

Main components

1

Parts

4
QtyValueFootprintReferences
110uFCapacitor_THT:CP_Radial_D8.0mm_P2.50mmC1
1ESP32Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ6
1WIZ850IOLibreria:WIZ850IOH1
1~ESP32_loli:ESP32_loliU3

More from nahucvc/Tejada

1

Similar boards

  • 2 layers69 × 43 mmDiagral uart esp32, the printed circuit board in 3D

    Diagral uart esp32

    nicolas5000/diagral-esp32

    This project permits to connect Home Assitant to your Diagral alarm system DIAG91AGFK (using the 20 pins connector on the back)

    12 parts6Apache-2.0
  • 2 layers90.3 × 72.8 mmRio tangbob, the printed circuit board in 3D

    Rio tangbob

    multigcs/rio-tangbob

    71 parts4
  • 2 layers50.4 × 50.4 mmBluepill ethernet, the printed circuit board in 3D

    Bluepill ethernet

    kellerkindt/bluepill_sensor

    Bluepill stm31f103 ethernet sensor extension board with SW written in Rust

    47 parts3Apache-2.0
  • 4 layers331.4 × 259.8 mmOvenMonESP32, the printed circuit board in 3D

    OvenMonESP32

    ThiSel18/OvenMonESP32CircuitBoard

    KiCad Project for Oven Monitoring

    6 parts1
  • 2 layers59.1 × 75.2 mmPico datalogger v4e, the printed circuit board in 3D

    Pico datalogger v4e

    bablokb/pcb-datalogger-v4e

    Pico Board for Data-Logging (Ethernet Version)

    27 partsCC-BY-SA-4.0
  • 2 layers50 × 50 mmHelix minimal, the printed circuit board in 3D

    Helix minimal

    flintwinters/helix-hardware

    KiCad 10 schematic for a USB powered STM32C071FBP6 with one shared SPI bus. The WIZ850io W5500 module and a 3.3 V, six wire microSD SPI breakout have separate chip selects. SWD is available for first firmware bring-up.

    20 parts
  • 2 layers80 × 80.5 mmF1c200s proj, the printed circuit board in 3D

    F1c200s proj

    JoachimBose/nabby-linux

    An Allwinner F1C100s / F1C200s buildroot external tree for (among others) the hardware challenge for VUCTF-2026

    68 partsGPL-2.0
  • 4 layers90 × 100 mmPCB Madre, the printed circuit board in 3D

    PCB Madre

    Jose-WaitNRest/PCB-Madre

    64 parts

Questions

What parts does the Placa use?

4 parts, built around the WIZ850IO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Placa KiCad files?

From the nahucvc/Tejada repository on GitHub, at the commit this page was made from: the board is ControlAuto/Diseño Placas kicad/kicad Esp32-ETH/ETH/placa.kicad_pcb and its schematic ControlAuto/Diseño Placas kicad/kicad Esp32-ETH/ETH/placa.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Placa design in my own project?

Its repository states no licence, so its author keeps all rights: ask nahucvc before reusing the design.