

IR sensor project
- Size
- 23 × 10.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 6
- Pads
- 19
- Tracks, vias
- 25, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Jun 2025
- Updated
- 5 Nov 2026
Overview
IR sensor project is an open-source printed circuit board by Nahaa0711, from the Nahaa0711/Micromouse-UofT repository on GitHub. It is a 2-layer board of 23 × 10.4 mm with 8 parts on 6 nets, routed with 25 tracks and 4 vias.
It is built around the SFH 300 and SFH 4550. Its parts include 3 resistors, 2 transistors, 1 capacitor, 1 diode and 1 connector. It belongs with the sensors and measurement boards of this library.
Main components
2Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | DMN3065LW-7 | MM_DMN3065LW-7:DMN3065LW-7 | Q2 |
| 1 | IR_1 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Horizontal | J1 |
| 1 | SFH300 | LED_THT:LED_D5.0mm_Clear | Q1 |
| 1 | SFH4550 | LED_THT:LED_D5.0mm_IRGrey | D1 |
More from Nahaa0711/Micromouse-UofT
2- 2 layers114.8 × 115 mm

- 2 layers11.2 × 13 mm

Similar boards
- 2 layers24.8 × 73 mm

- 2 layers

- 2 layers49 × 34 mm

Edno
AgustinPrietoValdez/competition-robots
Custom competition robots — maze/micromouse (MISA), sumo (TATAMI 1) & mini-sumo (RUCHO). KiCad PCBs, STM32/Arduino firmware, Fusion 360. National champion & international prizes — by EDNAROBOTICS.
40 partsMIT - 2 layers103 × 50 mm

- 2 layers70 × 76 mm

- 2 layers78 × 61 mm

- 2 layers

- 4 layers

Questions
How big is the IR sensor project PCB?
It measures 23 × 10.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IR sensor project use?
8 parts, built around the SFH 300 and SFH 4550. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IR sensor project KiCad files?
From the Nahaa0711/Micromouse-UofT repository on GitHub, at the commit this page was made from: the board is Micromouse/IR_sensor_project/IR_sensor_project.kicad_pcb and its schematic Micromouse/IR_sensor_project/IR_sensor_project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IR sensor project design in my own project?
Its repository states no licence, so its author keeps all rights: ask Nahaa0711 before reusing the design.