Skip to the content
2 layersDat, the printed circuit board in 3D

This repository contains small programs for different robots

Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
23
Pads
90
Tracks, vias
27, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Jan 2021
Updated
20 Jul 2024

Overview

Dat is an open-source printed circuit board by Ni3nayka, from the Ni3nayka/sketch repository on GitHub. It is a 2-layer board with 36 parts on 23 nets, routed with 27 tracks and 0 vias.

It is built around the 74HC4051 and SFH 300. Its parts include 17 resistors, 8 diodes, 8 transistors, 1 capacitor and 1 IC.

Main components

2

README

README.md

sketch

This repository contains small programs for different robots

Parts

36
QtyValueFootprintReferences
17RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16, R17 +1
8LEDLED_SMD:LED_0805_2012Metric_CastellatedD1, D2, D3, D4, D5, D6, D7, D8
8SFH300Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderQ1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
174HC4051Package_SO:SOP-16_4.55x10.3mm_P1.27mmU1
1CCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1
1Conn_01x06_MaleConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1

Similar boards

  • 2 layers24.8 × 73 mmFlicker, the printed circuit board in 3D

    Flicker

    timdeegan/flicker

    Lighting flicker meter

    4 parts3
  • 2 layers49 × 34 mmEdno, the printed circuit board in 3D

    Edno

    AgustinPrietoValdez/competition-robots

    Custom competition robots — maze/micromouse (MISA), sumo (TATAMI 1) & mini-sumo (RUCHO). KiCad PCBs, STM32/Arduino firmware, Fusion 360. National champion & international prizes — by EDNAROBOTICS.

    40 partsMIT
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 4 layers113.5 × 105.5 mmMultistepper, the printed circuit board in 3D

    Multistepper

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    243 parts208
  • 4 layers230.7 × 97.8 mmTako, the printed circuit board in 3D

    Tako

    ssbb/tako

    34 key EC split keyboard

    146 parts200MIT
  • 2 layers100 × 45.3 mmOpeNITHM, the printed circuit board in 3D

    OpeNITHM

    Yona-W/OpeNITHM

    Open-Source hardware Seaurchin/Qnithm/Laverita controller

    26 parts196GPL-3.0
  • 4 layers100 × 100 mmPCBA OCTV, the printed circuit board in 3D

    PCBA OCTV

    intechstudio/grid-hardware

    403 parts59GPL-3.0

Questions

What parts does the Dat use?

36 parts, built around the 74HC4051 and SFH 300. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dat KiCad files?

From the Ni3nayka/sketch repository on GitHub, at the commit this page was made from: the board is arduino/ещё/dat/безымянный5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dat design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ni3nayka before reusing the design.