2 layers17.9 × 64.9 mm
2 layers23.7 × 15.2 mm
Boost converter
n8thnl/boost-converterA DIY boost converter built on the TPS61022
- Size
- 23.7 × 15.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 6
- Pads
- 30
- Tracks, vias
- 54, 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Apr 2024
- Updated
- 30 Apr 2024
Overview
Boost converter is an open-source printed circuit board by n8thnl, from the n8thnl/boost-converter repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 23.7 × 15.2 mm with 11 parts on 6 nets, routed with 54 tracks and 2 vias.
It is built around the TPS61022. Its parts include 4 capacitors, 2 resistors, 1 IC and 1 inductor. It belongs with the power boards of this library.
Main components
1Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4 |
| 3 | SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | Connector_Wire:SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm | 3V, GND, VOUT |
| 1 | 1.0uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 732k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | TPS61022 | Package_DFN_QFN:Texas_RWU0007A_VQFN-7_2x2mm_P0.5mm | U1 |
Similar boards
- 4 layers142 × 102 mm
- 2 layers65 × 56 mm
- 4 layers136.2 × 25 mm
- 2 layers170 × 55.1 mm
EC426
jacoblinnabary/JCOBB-Controller-Board
Analog PWM generator for RC/drone control. Produces 1–2 ms pulses at a 20 ms frame using an RC ramp and comparator.
49 parts1MIT - 4 layers25 × 37.3 mm
LinKey
Konkzor/LinKey
Une clé WIFI lisant la sortie TIC du Linky connectée au broker MQTT d'un Home Assistant
42 parts1CERN-OHL-W-2.0 - 2 layers140.1 × 85.5 mm
Cardiac
Adamos-khalilos/cardiac-monitor-pcb
Open-source PCB design for a portable cardiac monitor — STM32F407 + ADS1292R AFE with full galvanic patient isolation (IEC 60601, 4kV), on-device NanoEdge AI arrhythmia classification, encrypted SD logging (AES-256 +…
75 partsMIT - 2 layers76 × 74.9 mm
Low Power Instrument
ahoang205/--MagneticField---Acceleration-Sensors
Dự án thiết kế hệ thống phần cứng và phần mềm nhúng (Embedded IoT System) công suất thấp dùng để đo đạc, thu thập dữ liệu Từ Trường 3 Trục và Gia Tốc / Góc Quay 6 Trục, truyền dữ liệu đo từ xa qua mạng không dây Wi-Fi…
106 partsMIT
Questions
How big is the Boost converter PCB?
It measures 23.7 × 15.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Boost converter use?
11 parts, built around the TPS61022. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Boost converter KiCad files?
From the n8thnl/boost-converter repository on GitHub, at the commit this page was made from: the board is boost-converter.kicad_pcb and its schematic boost-converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Boost converter design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).