
Panel
cheyao/nrf54l15-discovery
nRF54L15 Discovery board for low-power BLE prototyping

This project was initially based on the American Embedded KiCad Template, available at: https://github.com/i2cjak/AmericanEmbeddedKiCadTemplate
BLE Gauge is an open-source printed circuit board by N4TH4NB, from the N4TH4NB/BLE_Gauge repository on GitHub. It is a 4-layer board with 58 parts on 93 nets, routed with 699 tracks and 156 vias.
It is built around the ATGM336H-5N31, LSM6DS3 and NPM1300-QEAA-R. Its parts include 23 capacitors, 9 resistors, 6 inductors, 4 ICs and 4 connectors. It belongs with the radio and wireless boards and the nRF52 and nRF5x boards of this library.
Texto q vou adicionar dps
This project was initially based on the American Embedded KiCad Template, available at: https://github.com/i2cjak/American_Embedded_KiCad_Template
The original project is licensed under CERN-OHL-P-2.0.
This project has been modified and adapted for its specific purpose.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Nath:C_0201_0603Metric_Nordic | C2, C12, C13, C16, C18 |
| 4 | 10uF | Nath:C_0603_1608Metric_Nordic | C3, C4, C5, C8 |
| 2 | 0R | Resistor_SMD:R_0201_0603Metric | R4, R5 |
| 2 | 100nF | Capacitor_SMD:C_0201_0603Metric | C9, C10 |
| 2 | 10nF | Nath:C_0201_0603Metric_Nordic | C22, C23 |
| 2 | 1uF | Nath:C_0603_1608Metric_Nordic | C1, C6 |
| 2 | 2.2uF | Nath:C_0201_0603Metric_Nordic | C14, C20 |
| 2 | 3.5nH | Nath:L_0201_0603Metric_Nordic | L4, L5 |
| 2 | 4.7kR | Nath:R_0201_0603Metric_Nordic | R1, R3 |
| 2 | TBD | Capacitor_SMD:C_0201_0603Metric | Z1, Z3 |
| 1 | 0.3pF | Nath:C_0201_0603Metric_Nordic | C21 |
| 1 | 0.5A | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | 0R | Capacitor_SMD:C_0201_0603Metric | Z2 |
| 1 | 1.5pF | Nath:C_0201_0603Metric_Nordic | C17 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 100kR | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 10uF | Nath:C_0402_1005Metric_Nordic | C11 |
| 1 | 120R/0.2A | Nath:L_0201_0603Metric_Nordic | FB1 |
| 1 | 12R | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1kR | Nath:R_0201_0603Metric_Nordic | R6 |
| 1 | 2.0pF | Nath:C_0201_0603Metric_Nordic | C19 |
| 1 | 2.2uF | Nath:C_0603_1608Metric_Nordic | C7 |
| 1 | 2.2uH | Nath:L_0806_2016Metric_Nordic | L1 |
| 1 | 2.7nH | Nath:L_0201_0603Metric_Nordic | L3 |
| 1 | 250kR | Nath:R_0201_0603Metric_Nordic | R2 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 3.9pF | Nath:C_0201_0603Metric_Nordic | C15 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | X2 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | X1 |
| 1 | 4.7uH | Nath:L_0603_1608Metric_Nordic | L2 |
| 1 | 47nH | Nath:L_0201_0603Metric_Nordic | L6 |
| 1 | ATGM336H-5N | RF_GPS:ublox_MAX | U4 |
| 1 | Antenna_Shield | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | AE1 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Right | AE2 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | Conn_01x15_MountingPin | Connector_FFC-FPC:Amphenol_F32Q-1A7x1-11015_1x15-1MP_P0.5mm_Horizontal | J4 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | LED_ARGB | LED_SMD:LED_SK6812_EC15_1.5x1.5mm | D1 |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7051x | J1 |
| 1 | nPM1300-QEAA | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias | U1 |
| 1 | nRF54L15-QFXX | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm_ThermalVias | U3 |

cheyao/nrf54l15-discovery
nRF54L15 Discovery board for low-power BLE prototyping


hlord2000/Sidewalk_Devkit
KiCad hardware design for a compact Nordic Semiconductor devkit built around an nRF54L15 target, nPM1300 power management, and an SX1262 sub-GHz radio front end.


NoctaLabs-Sh/Nocta-One-Hardware
Open hardware for the Nocta vault: an offline password manager with a 2.7 inch e-ink screen. KiCad schematic, board layout, gerbers and BOM. CERN-OHL-S v2.


spawnID0001/allpeople-wave-pcb
This repository will contain all the pcb design files for the wave product.

blonski3/ibm-modern-m-ssk
Decyzje projektowe i ich uzasadnienia: docs/HARDWAREDECISIONS.md; historia zmian: docs/CHANGELOG.md.
58 parts, built around the ATGM336H-5N31, LSM6DS3 and NPM1300-QEAA-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the N4TH4NB/BLE_Gauge repository on GitHub, at the commit this page was made from: the board is BLE_Gauge.kicad_pcb and its schematic BLE_Gauge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask N4TH4NB before reusing the design.