
WS2812Controller
klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes

LED board to controll up to 8 LED strips from a XIAO ESP32-C3
Otherworlds v2 is an open-source printed circuit board by n2048-creative-technology, from the n2048-creative-technology/led-board- repository on GitHub, published under the MIT licence. It is a 2-layer board of 98.7 × 90.9 mm with 30 parts on 31 nets, routed with 205 tracks and 13 vias.
It is built around the SN74AHCT125N. Its parts include 18 connectors and 8 resistors.
otherworlds-v2KiCad 9 project for the LED driver board: a XIAO ESP32C3 carrier that buffers its eight data outputs to 5 V and hands them to eight 24 V LED segments.
Open otherworlds-v2.kicad_pro. Rendered exports of
the schematic and layers live in ../images/schematic/
and are regenerated with bash ../scripts-tools/export-kicad.sh.
| Size | 98.7 × 90.9 mm, 1.6 mm, 2 layer |
| Mounting | 4 × M4 plated holes (H1–H4) |
| Assembly | Through-hole throughout — hand-solderable |
| Input | 24 V via Wago 734-132 (J19) |
| Logic supply | DC-DC buck module on J15–J18, 24 V → 5 V |
Eight identical channels:
XIAO Dn ─► SN74AHCT125N (J3 for D1-D4, J4 for D5-D8) ─► 220 Ω (Rn) ─► LED connector pin 2AHCT logic runs from 5 V and accepts 3.3 V as a valid high, so it both level shifts and buffers: the strip sees a full 5 V edge instead of the XIAO's marginal 3.3 V. The series resistor damps reflections and sits at the driver end of the line.
+24 V runs from J19 straight to pin 3 of every LED connector. It never enters the logic side of the board.
Traced through the netlist of the committed schematic:
| Connector | J7 (1) | J8 (2) | J9 (3) | J10 (4) | J11 (5) | J12 (6) | J13 (7) | J14 (8) |
|---|---|---|---|---|---|---|---|---|
| Net | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 |
| Resistor | R1 | R2 | R3 | R4 | R5 | R6 | R7 | R8 |
| Buffer | J3 | J3 | J3 | J3 | J4 | J4 | J4 | J4 |
| XIAO pin | D1 | D2 | D4 | D3 | D5 | D6 | D8 | D7 |
| GPIO | 3 | 4 | 6 | 5 | 7 | 21 | 8 | 20 |
J9/J10 and J13/J14 are fed by crossed pairs. Harmless — the firmware drives all eight outputs with one identical waveform — but worth knowing at the bench.
LED connectors are all pin 1 = GND, pin 2 = data, pin 3 = +24 V.
⚠️ The working copy is currently mid-edit:
D1/D2appear once each andD7/D8three times, i.e. J3's first two inputs are labelled D7/D8 rather than D1/D2. InHEADevery label appears exactly twice. See the root README.
Other headers:
| Ref | Purpose |
|---|---|
| J1 / J2 | XIAO ESP32C3, 1×7 each |
| J15–J18 | Buck module: J18/J17 = 24 V in, J16/J15 = 5 V out |
| J19 | 24 V input, Wago cage clamp |
| J20 | Breakout of the three unused pins: D0, D9, D10 |
⚠️ D0/GPIO2 and D9/GPIO9 on J20 are strapping pins. Anything wired there can stop the board booting — read ../firmware/docs/xiao-esp32c3-pinout.md first.
production/ holds the JLCPCB fabrication-toolkit output:
otherworlds-v2.zip (gerbers),
bom.csv, positions.csv,
designators.csv and an IPC netlist. Settings are
in fabrication-toolkit-options.json.
Everything is through-hole, so the BOM carries no LCSC part numbers — it is a hand-assembly list, not an assembly-service one.
Work from the strip's rating, not from the firmware's estimate: the firmware's milliamp figures model a 5 V strip, while these segments run at 24 V. Take the strip's W/m × total length ÷ 24 V, add margin, and fuse the input. Inject at both ends of each segment.
Details, and what the firmware's budget number actually controls, in the root README.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 4 | MountingHole_Pad_MP | MountingHole:MountingHole_4.3mm_M4_Pad | H1, H2, H3, H4 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 2 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J15, J17 |
| 2 | LED4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10, J20 |
| 2 | SN74AHCT125N | Package_DIP:DIP-14_W7.62mm | J3, J4 |
| 1 | 24V | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J18 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J16 |
| 1 | Conn_01x02 | Connector_Wago:Wago_734-132_1x02_P3.50mm_Vertical | J19 |
| 1 | LED1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | LED2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | LED3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | LED5 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | LED6 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | LED7 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | LED8 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |

klein0r/pcb-ws2812-wifi-controller
WiFi Controller for WS2812 LED Stripes


klein0r/pcb-ws2812-ethernet-controller
Ethernet Controller for WS2812 LED Stripes

f2daz/WLED_PCB_D1_Mini
PCB for WLED with WeMos D1 Mini and SN74AHCT125N level shifter

andrekuehne/openradfan
An ESPHome-driven controller for radiator fans to improve heat output

afoxinsocks/foxie-clock
A Nixie-like, retro, RGB LED, Arduino-powered clock


It measures 98.7 × 90.9 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the SN74AHCT125N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the n2048-creative-technology/led-board- repository on GitHub, at the commit this page was made from: the board is electronics/otherworlds-v2.kicad_pcb and its schematic electronics/otherworlds-v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).