MypaceEngine/Spresense_B2B_Board2SpresenseのBtoBコネクタのエクステンションボード
Spresense DIP is an open-source printed circuit board by MypaceEngine, from the MypaceEngine/Spresense_B2B_Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 67 × 68 mm with 7 parts on 89 nets, routed with 537 tracks and 0 vias.
It is built around the DF40HC(3.0)-100DS-0.4V(58).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2_DIN965_Pad | Mounting_Holes:MountingHole_2.2mm_M2_DIN965_Pad | REF1**, REF2**, REF3**, REF4** |
| 2 | CONN_02X25 | Pin_Headers:Pin_Header_Straight_2x25_Pitch2.54mm | P1, P2 |
| 1 | DF40HC(3.0)-100DS-0.4V(58) | Spresense:spresense | J1 |
It measures 67 × 68 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the DF40HC(3.0)-100DS-0.4V(58). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MypaceEngine/Spresense_B2B_Board repository on GitHub, at the commit this page was made from: the board is src/Spresense_DIP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
heyitsarthur/Capstone-Project-Smart-glasses-for-the-visually-impaired
The system operates on a distributed architecture split between a head-mounted sensor array and a chest-mounted compute module. Main Computing Unit: Raspberry Pi Compute Module 4 (CM4) running on a custom PCB.
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
