

MicroMouseMainBoard
- Size
- 80.1 × 113 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 46
- Pads
- 145
- Tracks, vias
- 339, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Apr 2026
- Updated
- 10 Apr 2026
Overview
MicroMouseMainBoard is an open-source printed circuit board by myRaspberryPiArticles, from the myRaspberryPiArticles/my-micromouse-pcb repository on GitHub. It is a 2-layer board of 80.1 × 113 mm with 38 parts on 46 nets, routed with 339 tracks and 10 vias.
It is built around the TLCR5800 and BC337-40. Its parts include 14 resistors, 3 diodes, 2 capacitors, 2 transistors and 1 connector.
Main components
2README
README.mdmy-micromouse-pcb
PCB files for my Gemini-inspired micromouse!
Table of contents
Images
Pinout
| Component | Component Pin | Pico GPIO Pin | Protocol / Type |
|---|---|---|---|
| DRV8833 Motor Driver | IN3 | 17 | Digital / PWM |
| IN4 | 16 | Digital / PWM | |
| EEP | 20 | Digital | |
| GND | GND | Power | |
| Spare Pins | Spare 1 | 18 | Digital |
| Spare 2 | 19 | Digital | |
| BTN 1 | BTNP1 | 21 | Digital Input |
| GND | GND | Power | |
| BTN 2 | BTNP2 | 10 | Digital Input |
| GND | GND | Power | |
| BTN 3 | BTNP3 | 9 | Digital Input |
| GND | GND | Power | |
| BTN 4 | BTNP4 | 8 | Digital Input |
| GND | GND | Power | |
| Gyroscope | GYRO1 (SCL) | 7 | I2C1 SCL |
| GYRO2 (SDA) | 6 | I2C1 SDA | |
| GND | GND | Power | |
| VCC | 3V3_OUT | Power | |
| Encoder | VCC | 3V3_OUT | Power |
| ENCODER1 | 5 | Digital | |
| ENCODER2 | 22 | Digital | |
| GND | GND | Power | |
| HC-05 Bluetooth Module | VCC | 3V3_OUT | Power |
| GND | GND | Power | |
| IN1 (TX) | 0 | UART0 TX | |
| IN2 (RX) | 1 | UART0 RX | |
| Servo | GND | GND | Power |
| VIN | VSYS | Power (5V/Battery) | |
| IN | 2 | PWM | |
| Actuator 1 | GND | GND | Power |
| VIN | VSYS | Power (5V/Battery) | |
| IN | 4 | Digital / PWM | |
| Actuator 2 | GND | GND | Power |
| VIN | VSYS | Power (5V/Battery) | |
| IN | 3 | Digital / PWM | |
| Indicator LED 1 | IN | 11 | Digital Out |
| GND | GND | Power | |
| Indicator LED 2 | IN | 12 | Digital Out |
| GND | GND | Power | |
| Indicator LED 3 | IN | 13 | Digital Out |
| GND | GND | Power | |
| Diagonal LEDs | IN | 15 | Digital Out |
| GND | GND | Power | |
| Front LED | IN | 14 | Digital Out |
| GND | GND | Power | |
| Photo Transistor 1 | IN | 26 | Analog (ADC0) |
| GND | GND | Power | |
| Photo Transistor 2 | IN | 27 | Analog (ADC1) |
| GND | GND | Power | |
| Photo Transistor 3 | IN | 28 | Analog (ADC2) |
| GND | GND | Power |
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9 |
| 3 | 680R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R12, R14 |
| 3 | BPW85C | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | FPD1, LDPD1, RDPD1 |
| 3 | LED | LED_THT:LED_D3.0mm | D1, D2, D3 |
| 3 | TLCR5800 | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | DLED1, DLED2, FLED1 |
| 2 | 100uF, 16v | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R6 |
| 2 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11, R13 |
| 2 | 3.2mm | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 2 | 390R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | BC337-40 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2 |
| 1 | 1k8 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 1 | 33R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | Conn_01x16 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J1 |
The 30 most common of 38 parts.
More from myRaspberryPiArticles/my-micromouse-pcb
1- 2 layers72.8 × 30.6 mm

Similar boards
- 2 layers40.5 × 81.4 mm

UKMARSBOT LineSensorBasic
ukmars/gemini
Respository for hardware and software components of UKMARSBOT gemini
32 parts9MIT - 4 layers99.1 × 81.3 mm

SSEverythingMainBoardv2
paulbuzzby/Micromouseboards
Here are different sets of PCBs for various Micro Mouse applications
71 parts - 2 layers45 × 53 mm

- 2 layers84.3 × 56.9 mm

Ebus
piwko28/smart-home-ebus-adapter
eBUS adapter PCB for use with ebusd-esp firmware as well as with other UART devices.
51 parts18GPL-3.0 - 2 layers283 × 177.5 mm

UC-50-001
sporniket/kicad-conversions--thomson-mo5--v1
A conversion to Kicad EDA of the schematics of a computer released around 1984 known as the "Thomson MO5".
225 parts7CC0-1.0 - 2 layers152.4 × 188 mm

Yoklama dip v1
ardaS37/varlama
An ESP32 RFID and Android NFC attendance system for managed facilities.
35 parts1 - 2 layers278 × 135 mm

- 2 layers45 × 30 mm

Questions
How big is the MicroMouseMainBoard PCB?
It measures 80.1 × 113 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MicroMouseMainBoard use?
38 parts, built around the TLCR5800 and BC337-40. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MicroMouseMainBoard KiCad files?
From the myRaspberryPiArticles/my-micromouse-pcb repository on GitHub, at the commit this page was made from: the board is MicroMouseMainBoard.kicad_pcb and its schematic MicroMouseTopPhat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MicroMouseMainBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask myRaspberryPiArticles before reusing the design.