4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers106.7 × 83.8 mm
ABAP
MX994/ABAP-PedalOverdrive/distortion pedal made for COMPSCI 391M.
- Size
- 106.7 × 83.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 31
- Pads
- 110
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Mar 2024
- Updated
- 1 Apr 2024
Overview
ABAP is an open-source printed circuit board by MX994, from the MX994/ABAP-Pedal repository on GitHub. It is a 2-layer board of 106.7 × 83.8 mm with 26 parts on 31 nets.
It is built around the TL082. Its parts include 8 capacitors, 6 resistors, 3 diodes, 3 connectors and 1 IC.
Main components
1Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R4, R6 |
| 3 | 100kΩ | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | R_HP_FREQ1, R_LP_FREQ1, R_VOLUME1 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 47nF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P10.00mm_Horizontal | C6, C7 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C4, C5 |
| 1 | 10kΩ | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | R_TONE1 |
| 1 | 1MΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 1kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C2 |
| 1 | 220nF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C3 |
| 1 | 22nF | Capacitor_THT:C_Axial_L3.8mm_D2.6mm_P10.00mm_Horizontal | C8 |
| 1 | 470nF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C1 |
| 1 | 500kΩ | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | R_GAIN1 |
| 1 | LED | LED_THT:LED_D4.0mm | D3 |
| 1 | SIGNAL_IN | Connector_Audio:Jack_6.35mm_Neutrik_NRJ6HF-1_Horizontal | J1 |
| 1 | SIGNAL_OUT | Connector_Audio:Jack_6.35mm_Neutrik_NRJ6HF-1_Horizontal | J2 |
| 1 | TL082 | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A_CircularHoles | J3 |
Questions
How big is the ABAP PCB?
It measures 106.7 × 83.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ABAP use?
26 parts, built around the TL082. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ABAP KiCad files?
From the MX994/ABAP-Pedal repository on GitHub, at the commit this page was made from: the board is ABAP.kicad_pcb and its schematic ABAP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ABAP design in my own project?
Its repository states no licence, so its author keeps all rights: ask MX994 before reusing the design.
Similar boards
- 2 layers82.1 × 82.1 mm
Uncut Gem
QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
207 parts210AGPL-3.0 - 2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59 - 2 layers130.6 × 112 mm
- 2 layers48 × 36.5 mm
Osillyscope etchable
tvlad1234/osillyscope
Low cost, low part count CH32V003-based oscilloscope
31 parts30MIT - 2 layers60 × 50 mm
- 2 layers79 × 107 mm
Eurorack spinfx
grappendorf/eurorack-spinfx
Spin FV-1 based effects module for Eurorack systems
80 parts16 - 2 layers167.8 × 200.6 mm
Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16