Skip to the content
2 layers1-FlightController, the printed circuit board in 3D

1-FlightController

MurilloHorvath/KiCad1

Projetos utilizando o software KiCad

Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
11
Pads
52
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
7 Feb 2026
Updated
4 Oct 2026

Overview

1-FlightController is an open-source printed circuit board by MurilloHorvath, from the MurilloHorvath/KiCad repository on GitHub, published under the MIT licence. It is a 2-layer board with 18 parts on 11 nets.

It is built around the MPM3550EGLE and 1N5819WS. Its parts include 7 capacitors, 6 resistors, 4 diodes and 1 IC. It belongs with the robots and motor control boards of this library.

Main components

2

README

README.md

Repositório com proprosito de anexar meus projetos utilizando o software KiCAD

Parts

18
QtyValueFootprintReferences
547uFCapacitor_SMD:C_0805_2012MetricC3, C4, C5, C6, C7
2100kResistor_SMD:R_0603_1608MetricR5, R6
216-213/GHC-YR1S2/3TLED_SMD:LED_0402_1005MetricD1, D2
21N5819WSDiode_SMD:D_SOD-323D3, D4
1100nFCapacitor_SMD:C_0603_1608MetricC2
110kResistor_SMD:R_0603_1608MetricR1
114k3Resistor_SMD:R_0603_1608MetricR3
11kResistor_SMD:R_0603_1608MetricR4
14.7uFCapacitor_SMD:C_0805_2012MetricC1
175kResistor_SMD:R_0603_1608MetricR2
1MPM3550EGLEPackage_LGA:MPS_LGA-18-10EP_12x12mm_P3.3mmU5

More from MurilloHorvath/KiCad

6
  • 2 layersESP, the printed circuit board in 3D

    ESP

    MurilloHorvath/KiCad

    Projetos utilizando o software KiCad

    72 parts1MIT
  • 2 layers41.6 × 26.8 mmEsquema Buzzer, the printed circuit board in 3D

    Esquema Buzzer

    MurilloHorvath/KiCad

    Projetos utilizando o software KiCad

    16 parts1MIT
  • 2 layersEsquema ReleFarol, the printed circuit board in 3D

    Esquema ReleFarol

    MurilloHorvath/KiCad

    Projetos utilizando o software KiCad

    6 parts1MIT

Similar boards

  • 4 layers65 × 56.5 mmNavigator, the printed circuit board in 3D

    Navigator

    azure-dynamics/navigator

    Flight-controller Pi HAT for Azure Dynamics' Radiance ROV

    58 parts
  • 2 layers26.5 × 34.4 mmPicoLoaderNSB, the printed circuit board in 3D

    PicoLoaderNSB

    makeo/PicoLoader

    A cheap and easy to install modchip for the Nintendo GameCube!

    45 parts320GPL-2.0
  • 6 layers55 × 95 mmEcho r1-rev1, the printed circuit board in 3D

    Echo r1-rev1

    amachronic/echoplayer

    Echo - Open Hardware Music Player

    154 parts281CERN-OHL-S-2.0
  • 4 layers37.1 × 37.2 mmDoorman, the printed circuit board in 3D

    Doorman

    AzonInc/Doorman

    ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

    44 parts252GPL-3.0
  • 2 layers35.9 × 62.7 mmRp2040-memcard, the printed circuit board in 3D

    Rp2040-memcard

    sd2psx/pcb

    The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.

    60 parts241
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 6 layers83.5 × 56 mmEspiff v3 1, the printed circuit board in 3D

    Espiff v3 1

    MDCservice/EsPiFF

    An ESP32 in the Raspberry Pi form factor

    172 parts223GPL-3.0
  • 6 layers90 × 153 mmBlackpants, the printed circuit board in 3D

    Blackpants

    o7-machinehum/Blackpants

    Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

    300 parts189MIT

Questions

What parts does the 1-FlightController use?

18 parts, built around the MPM3550EGLE and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 1-FlightController KiCad files?

From the MurilloHorvath/KiCad repository on GitHub, at the commit this page was made from: the board is SkyDrones-Projects/FPV-Drone-Hardware/1-FlightController/Schematics/1-FlightController.kicad_pcb and its schematic Empresa-EcoQuali/EC01/outputs/EC01_KiCad_REV0_2/KiCad/01_Alimentacao_Bateria.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 1-FlightController design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).