
SmartPowerBoard
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
Navboard is an open-source printed circuit board by murexrobotics, from the murexrobotics/electrical repository on GitHub, published under the MIT licence. It is a 2-layer board with 47 parts on 62 nets, routed with 41 tracks and 0 vias.
It is built around the BMM150, LIS3MDL and BMI088, with the ICM-42688-P, LSM9DS1 and SHT35-DIS-F among its other parts. Its parts include 18 capacitors, 7 ICs, 2 resistors, 1 connector and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18 +2 |
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C5, C6, C15, C16, C17, C18 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C9, C11, C12, C13 |
| 3 | 10nF | Capacitor_SMD:C_0603_1608Metric | C3, C7, C10 |
| 2 | BMI088 | BMI088:PQFN50P450X300X100-16N | U3, U7 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | BMM150 | Package_CSP:WLCSP-12_1.56x1.56mm_P0.4mm | U5 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | ICM-42688-P | ICM-42688-P:LGA14_2P5X3X0P91_IVS | U4 |
| 1 | LIS3MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U1 |
| 1 | LSM9DS1 | Package_LGA:LGA-24L_3x3.5mm_P0.43mm | U6 |
| 1 | SHT35-DIS | Sensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.


felixznr/ALBERT
Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.


si-nalsal/pcb-mantis
A servo-based UAV flight controller built around the STM32H743IIK6 (Cortex-M7, UFBGA-201, 0.65 mm pitch). The board distributes power to a fixed-wing/multirotor airframe with 16 PWM servo outputs, redundant IMU and…



aycaozkann/sensirion-sht35-breakout
SHT35 I2C temperature/humidity sensor breakout board — KiCad schematic + PCB, DRC/ERC clean, fab-ready gerbers/BOM/PnP
47 parts, built around the BMM150, LIS3MDL, BMI088 and ICM-42688-P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the murexrobotics/electrical repository on GitHub, at the commit this page was made from: the board is navboard/navboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).