
SmartPowerBoard
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
Bmi088 is an open-source printed circuit board by murexrobotics, from the murexrobotics/electrical repository on GitHub, published under the MIT licence. It is a 2-layer board of 24.6 × 14.2 mm with 11 parts on 13 nets, routed with 86 tracks and 30 vias.
It is built around the BMI088. Its parts include 3 connectors, 2 capacitors, 1 resistor, 1 IC and 1 diode.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ADDR | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | BMI088 | BMI088:PQFN50P450X300X100-16N | U1 |
| 1 | CONN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | HW INTRP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | I2C | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | PWR | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SPI | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.

pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.

open-dynamic-robot-initiative/open-motor-driver-initiative
Open-source drive for brushless motors, following the open dynamic robot initiative

oresat/oresat-adcs-hardware
Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

Terrapin-Rocket-Team/SRAD-Avionics
Code and PCBs for the avionics subteam for the SRAD flight computer and side projects


ImperialSpaceSociety/Project-Mach-1
This is the code and hardware designs for the high powered rocketry project at the Imperial College Space Society

ajisrawi/dronemagnav
Magnetic-anomaly navigation (MagNav) board + firmware for drones: ESP32-S3, BMI088, LIS3MDL, BMP280, u-blox GNSS, WDMAM map matching, particle filter, MAVLink, phone route planner. Proprietary - all rights reserved.
It measures 24.6 × 14.2 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the BMI088. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the murexrobotics/electrical repository on GitHub, at the commit this page was made from: the board is breakouts/bmi088/bmi088.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).