

Wire tracer reciever
Hardware tool to trace wires
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 14
- Pads
- 148
- Tracks, vias
- 388, 24
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 29 Mar 2016
- Updated
- 29 Mar 2016
Overview
Wire tracer reciever is an open-source printed circuit board by mumme74, from the mumme74/wire_tracer repository on GitHub. It is a 2-layer board of 50 × 50 mm with 64 parts on 14 nets, routed with 388 tracks and 24 vias.
It is built around the TL071IDT, 2N7002E and DMP3099L-7-ES. Its parts include 20 resistors, 12 capacitors, 8 diodes, 6 transistors and 4 connectors.
Main components
3TL071IDT
SO-8-40℃~+105℃ 1 1.4mA 10uV/℃ 15nV/√Hz@1kHz 16V/us 20pA 3mV 40mA 4MHz 5pA 6V~36V 86dB Short-Circuit Protection、Built-in compensation、Latch-up suppression SO-8 FET Input Amplifiers ROHSSTMicroelectronicsFET Input Amplifiers2N7002E
SOT-23-55℃~+150℃ 1 N-channel 2.5V 225mW 3.5Ω@5V 300mA 60V N-Channel SOT-23 MOSFETs ROHSSlkorMOSFETsDMP3099L-7-ES
SOT-231 P-Channel 1.4W 1.5V 3.8A 30V 46mΩ@10V、62mΩ@4.5V 550pF 6.5nC@10V 63pF 75pF P-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETs
README
README.mdwire_tracer
Hardware tool to trace wires
No uC involved, driven by a 9V battery Features:
- Soft turn on, auto shutoff
- sender and reciever
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100k | Resistors_SMD:R_1206_HandSoldering | R1, R1, R2, R2, R6, R6 |
| 4 | 100pF | Resistors_SMD:R_1206_HandSoldering | C2, C2, C6, C6 |
| 4 | 1M | Resistors_SMD:R_1206_HandSoldering | R3, R3, R5, R5 |
| 4 | 1n4148 | Diodes_SMD:SOD-123 | D1, D1, D2, D2 |
| 4 | 2N7002E | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q2, Q2, Q3, Q3 |
| 2 | 100nF | Resistors_SMD:R_1206_HandSoldering | C4, C4 |
| 2 | 10M | Resistors_SMD:R_1206_HandSoldering | R8, R8 |
| 2 | 10uF | Resistors_SMD:R_1206_HandSoldering | C3, C3 |
| 2 | 1N4148 | Diodes_SMD:SOD-123 | D4, D4 |
| 2 | 1k | Resistors_SMD:R_1206_HandSoldering | R9, R9 |
| 2 | 1uF | Resistors_SMD:R_1206_HandSoldering | C1, C1 |
| 2 | 330 | Resistors_SMD:R_1206_HandSoldering | R10, R10 |
| 2 | 330k | Resistors_SMD:R_1206_HandSoldering | R4, R4 |
| 2 | 470uF | Capacitors_SMD:c_elec_8x10 | C5, C5 |
| 2 | 50k | modules:PTV09A | RV1, RV1 |
| 2 | 680 | Resistors_SMD:R_1206_HandSoldering | R7, R7 |
| 2 | Battery_9v | modules:SolderWirePad_2x_1-2mmDrill | BT1, BT1 |
| 2 | DMP3099L-7 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q1 |
| 2 | LED | LEDs:LED-5MM | D3, D3 |
| 2 | TL071IDT | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1, U1 |
| 2 | aerial | Wire_Pads:SolderWirePad_single_1-2mmDrill | P1, P1 |
| 2 | aerial_gnd | Wire_Pads:SolderWirePad_single_1-2mmDrill | P2, P2 |
| 2 | on-off | Buttons_Switches_ThroughHole:SW_TH_Tactile_Omron_B3F-10xx | SW1, SW1 |
| 2 | piezo | modules:PS1420 | SP1, SP1 |
The 60 most common of 64 parts.
More from mumme74/wire_tracer
1- 2 layers50 × 50 mm

Similar boards
- 2 layers103.2 × 74.1 mm

- 4 layers60 × 127 mm

- 6 layers98.6 × 88 mm

- 6 layers100 × 160 mm

OWNVERTER
owntech-foundation/OWNVERTER
The OwnVerter is an open-source 3-phase power converter that can be used to control multiple types of motors and is compatible with different types of sensors.
474 parts16 - 4 layers60.4 × 70.3 mm

Pico vga
mdrobot7/pico-vga
A Raspberry Pi Pico - based graphics adapter and game engine.
48 parts5GPL-3.0 - 4 layers80 × 100 mm

Ice40 breakout
RubenVoell/iceduino
The basic idea behind this project is to create a simple breakout of an ICE40 FPGA with some LEDs and Buttons to interact with the FPGA and enough resources to run a simple softcore, like a small RISC-V core.
248 parts3 - 4 layers150 × 120 mm

Ephys test board
open-ephys/ephys-test-board
General purpose, automated electrophysiology test board
567 parts1 - 4 layers84.1 × 66 mm

Questions
How big is the Wire tracer reciever PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wire tracer reciever use?
64 parts, built around the TL071IDT, 2N7002E and DMP3099L-7-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wire tracer reciever KiCad files?
From the mumme74/wire_tracer repository on GitHub, at the commit this page was made from: the board is wire_tracer_reciever/wire_tracer_reciever.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wire tracer reciever design in my own project?
Its repository states no licence, so its author keeps all rights: ask mumme74 before reusing the design.