

ELE340 rep
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 60
- Pads
- 211
- Tracks, vias
- 228, 9
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Sep 2024
- Updated
- 6 Dec 2024
Overview
ELE340 rep is an open-source printed circuit board by Mulakulu, from the Mulakulu/ELE340_rep repository on GitHub. It is a 2-layer board of 80 × 100 mm with 76 parts on 60 nets, routed with 228 tracks and 9 vias.
It is built around the LM22670QMR-5.0, L717HDE15P and SMAJ26A, with the TS53YJ203MR10 among its other parts. Its parts include 18 capacitors, 11 resistors, 6 ICs, 3 connectors and 1 diode.
Main components
4LM22670QMR-5.0
SOIC-8-EP-40℃~+125℃@(TJ) 1 3A 4.5V~42V 500kHz 5V Buck Buck Built-in Fixed No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersL717HDE15P
插件-55℃~+155℃ 15P 250V 3 3A High Density D-Sub Male 插件 D-Sub / VGA Connectors ROHSAmphenolD-Sub / VGA ConnectorsSMAJ26A
DO-214AC(SMA)ESD And Surge Protection (TVS/ESD)hongjiachengTS53YJ203MR10
SMD,5x5mm1 20kΩ 250mW ±100ppm/℃ ±20% SMD,5x5mm Potentiometers, Variable Resistors ROHSVishay IntertechnologyPotentiometers & Variable Resistors
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | TestPoint | Library:testpoint_1.4mm | TG1, TG2, TGA1, TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP12, TP13, TP14, TP15, TP16, TP17 +1 |
| 10 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6, C7, C9, C10, C11, C14, C15, C16, C17, C18 |
| 4 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C4, C5, C8, C13 |
| 3 | 10kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R9, R12 |
| 3 | 68Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R4, R7 |
| 3 | PESD3V3U1UT,215 | Library:SOT95P230X110-3N | TVS2, TVS3, TVS4 |
| 3 | ~ | Library:testpoint_1.4mm | TP9, TP10, TP11 |
| 2 | 120Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R3 |
| 2 | Conn_01x08_Pin | Library:MB1x8Pins_part2 | MB1_part2, MB2_part2 |
| 2 | Conn_01x08_Pin | Library:MB1x8Pins | MB1_part1, MB2_part1 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | ~ | Library:Pin_Header_2x1_P2.54mm_Vertical | JMP2, JMP3 |
| 1 | 100uH | Library:SDR2207 | L1 |
| 1 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 10μF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C12 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 20kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 330Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 47kΩ | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | ADM3488ExR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Conn_01x02_Socket | Library:SL35290G | J1 |
| 1 | Conn_01x03_Socket | Library:Pin_Header_1x3_P3.5mm | J3 |
| 1 | L717HDE15P | Library:15PinDsub | J2 |
| 1 | LM22670QMR-5.0 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.81mm | U1 |
| 1 | LT1789 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | MC33275ST-3.3T3G | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | SB120 | Diode_SMD:D_MicroSMP_AK | D1 |
| 1 | SMAJ26A | Diode_SMD:D_SMA | TVS1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TS53YJ203MR10 | Library:TS53YJ | RP1 |
| 1 | WE430182070816 | Library:Switch WE430182070816 | SW1 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | ~ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | ~ | Library:Pin_Header_1x3_P2.54mm | JMP1 |
Similar boards
- 4 layers88 × 94.5 mm

- 4 layers32 × 49 mm

DaFO
ywhs05/DigitalToFiberOpticConverter-PCB
Circuito que recibe señales digitales y las convierte a fibra óptica.
32 partsMIT - 2 layers60 × 111.3 mm

Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0 - 6 layers47 × 105 mm

CompactPi
loganrf/compactPi
compactPi is a project to develop a compact Raspberry Pi Compute Module carrier suitable for ArduPilot applications. It's primarily targeted at marine applications (ArduSub/ArduRover).
127 parts2CERN-OHL-S-2.0 - 4 layers128 × 128 mm

SF 01 Compute Board
sandgum/Triangulate-SF_01-Speaker-Frame
A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP
369 parts2 - 4 layers65 × 56 mm

- 4 layers163 × 83 mm

Voxboard
shadedvox/arsenal
A fully custom 6 degree-of-freedom robotic arm, built from the ground up across hardware, firmware, and mechanical design.
182 parts1Apache-2.0 - 4 layers96 × 43 mm

Outdoor module
shm-dmitry/auto_close_window
This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"
127 parts1Apache-2.0
Questions
How big is the ELE340 rep PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ELE340 rep use?
76 parts, built around the LM22670QMR-5.0, L717HDE15P, SMAJ26A and TS53YJ203MR10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ELE340 rep KiCad files?
From the Mulakulu/ELE340_rep repository on GitHub, at the commit this page was made from: the board is KiCad_files/KiCad_files.kicad_pcb and its schematic KiCad_files/KiCad_files.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ELE340 rep design in my own project?
Its repository states no licence, so its author keeps all rights: ask Mulakulu before reusing the design.