MuffinKing-jpeg/FanCTRLControlled board for PC fans, with mux capabilities. WIP
FanCTRL is an open-source printed circuit board by MuffinKing-jpeg, from the MuffinKing-jpeg/FanCTRL repository on GitHub. It is a 4-layer board with 272 parts on 145 nets, routed with 72 tracks and 0 vias.
It is built around the OPA2188AID, AMS1117-3.3 and TPS61089, with the SMF15A, SS34 and DTC143Z among its other parts. Its parts include 72 capacitors, 72 resistors, 35 diodes, 14 transistors and 10 connectors. It belongs with the STM32 boards of this library.
Yet another fan controller. Has muxing capabilities. Can convert DC input to pwm output or vice versa.
WIP| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | SMF15A | Diode_SMD:D_SMF | D1, D10, D12, D13, D14, D16, D17, D18, D20, D21, D22, D24, D25, D26, D28, D29 +10 |
| 17 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C6, C7, C8, C12, C15, C50, C51, C52, C53, C54, C76, C84 +1 |
| 16 | 100 | Resistor_SMD:R_0603_1608Metric | R18, R19, R22, R23, R26, R27, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39 |
| 16 | 22u | Capacitor_SMD:C_0805_2012Metric | C24, C25, C26, C27, C30, C31, C32, C33, C36, C37, C38, C39, C42, C43, C44, C45 |
| 15 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R6, R12, R13, R14, R40, R42, R44, R46, R48, R49, R50, R51, R52 |
| 12 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14 |
| 9 | SS34 | Diode_SMD:D_SMA | D2, D7, D11, D15, D19, D23, D27, D31, D35 |
| 8 | 200k | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R15, R41, R43, R45, R47 |
| 8 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C22, C23, C28, C29, C34, C35, C40, C41 |
| 8 | 22uF | Capacitor_SMD:C_0805_2012Metric | C13, C14, C16, C18, C20, C21, C71, C72 |
| 8 | 33k | Resistor_SMD:R_0402_1005Metric | R87, R88, R89, R90, R97, R98, R99, R100 |
| 8 | 5.1k | Resistor_SMD:R_0402_1005Metric | R83, R84, R85, R86, R93, R94, R95, R96 |
| 8 | DTC143Z | Package_TO_SOT_SMD:SC-59 | Q3, Q4, Q6, Q7, Q9, Q10, Q12, Q13 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11, C74, C75, C82, C83 |
| 5 | 22k | Resistor_SMD:R_0402_1005Metric | R10, R17, R21, R25, R29 |
| 5 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C5, C10, C17, C73, C81 |
| 5 | 75k | Resistor_SMD:R_0402_1005Metric | R11, R16, R20, R24, R28 |
| 5 | Conn_01x04_Pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J5, J7, J8, J9, J10 |
| 5 | SW_Push | PCM_Switch_Keyboard_Kailh:SW_Kailh_Choc_V1V2_1.00u | SW3, SW4, SW5, SW6, SW7 |
| 4 | 0.5 | Resistor_SMD:R_2512_6332Metric | R81, R82, R91, R92 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C77, C78, C85, C86 |
| 4 | 10p | Capacitor_SMD:C_0402_1005Metric | C79, C80, C87, C88 |
| 4 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C46, C47, C48, C49 |
| 4 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1, M2, M3, M4 |
| 4 | Fiducial | Fiducial:Fiducial_1mm_Mask3mm | FID1, FID2, FID3, FID4 |
| 4 | HL 40N06D | Muffin_SMD:PowerDI3333-8 | Q5, Q8, Q11, Q14 |
| 4 | I_OUT | TestPoint:TestPoint_Pad_D1.0mm | TP42, TP43, TP44, TP45 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 4 | OUT_GATE | TestPoint:TestPoint_Pad_D1.0mm | TP34, TP35, TP36, TP37 |
| 4 | USART | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP24, TP25, TP27, TP28 |
| 3 | GND | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP23, TP26, TP29 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x03_MountingPin | Connector_Molex:Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal | J2, J3 |
| 2 | OPA2188 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 12V35 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP33 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 32.768kHz | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | Y2 |
| 1 | 3V3 | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP32 |
| 1 | 6.8uH | Inductor_SMD:L_Changjiang_FXL0630 | L1 |
| 1 | 8MHz | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BOOT | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP2 |
| 1 | Barrel_Jack_Switch_Pin3Ring | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J6 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J4 |
| 1 | Conn_01x05_MountingPin | Connector_Molex:Molex_PicoBlade_53261-0571_1x05-1MP_P1.25mm_Horizontal | J1 |
| 1 | EN_12V | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP31 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP20 |
| 1 | IRLML6402 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | JTCK | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | JTDI | TestPoint:TestPoint_Pad_D1.0mm | TP18 |
| 1 | JTDO | TestPoint:TestPoint_Pad_D1.0mm | TP19 |
| 1 | JTMS | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | NRST | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 1 | NRST | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | SCL | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP21 |
| 1 | SDA | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP22 |
| 1 | STM32F411RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TPS61089 | Package_DFN_QFN:Texas_VQFN-RNR0011A-11 | U3 |
| 1 | VIN | TestPoint:TestPoint_Pad_D1.0mm | TP30 |
| 1 | ~ | Muffin_THT:OLED_Module_I2C_WeAct | DISP1 |
272 parts, built around the OPA2188AID, AMS1117-3.3, TPS61089 and SMF15A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MuffinKing-jpeg/FanCTRL repository on GitHub, at the commit this page was made from: the board is FanCTRL.kicad_pcb and its schematic FanCTRL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MuffinKing-jpeg before reusing the design.
CARSSCenter/OpenNerve-Implantable-Pulse-Generator
Source files for the OpenNerve implantable pulse generator (IPG), including firmware and hardware for Gen1 and Gen2 PCBAs as well as enclosure CAD and documentation.
0hasant/Liion_Cell_Simulator
Single-cell characterization bench for 18650 and 21700 Li-ion cells (DMEGC INR45E, generic 3.5 Ah 18650). Part of the Solaris final-year project.
Hakman482/fpga-power-quality-monitor
A complete hardware–FPGA–software prototype for real-time single-phase power-quality measurement, developed as an MSc Electronic & Electrical Engineering project.
xlazam01/AstroUniBoard
STM32G0B1-based telescope focuser/rotator controller — OnStepX firmware port + KiCad PCB
retrobuiltRyan/4x4_Rover_ESP32
1:10 scale robot Rover with ESP32 and PS4 controller. Custom PCB for multi channel motor control