TPS61089

Texas Instruments

Part id: ti/TPS61089
Category: Uncategorised
Pins: 20
Used on: 9 open-source boards

Overview

The TPS61089 is an uncategorised made by Texas Instruments with 11 pins.

PCBKit's library has its KiCad symbol (Regulator_Switching:TPS61089, from KiCad's library) and its footprint (Package_DFN_QFN:Texas_VQFN-RNR0011A-11, from KiCad's library), ready for a KiCad board. 9 open-source boards in 9 repositories on GitHub use it.

Symbol

Regulator_Switching:TPS61089From KiCad's library

Footprint

Package_DFN_QFN:Texas_VQFN-RNR0011A-11From KiCad's library

Pinout

The pins of the TPS61089
Pin	Name	Type
1	FSW	Passive
2	VCC	Passive
3	FB	Input
4	COMP	Passive
5	GND	Power in
6	VOUT	Power out
7	EN	Input
8	ILIM	Passive
9	VIN	Power in
10	BOOT	Passive
11	SW	Input

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/ti/TPS61089" title="TPS61089 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

9See all 9

2 layers113.9 × 57.3 mm
USB UPS Raspberry
Arsh0509/PI-ups
A small UPS for operating Raspberry PI (Designed using KiCAD)
46 parts
4 layers64.8 × 18 mm
Corncob
aswild/corncob
Corncob is an adapter to run standard 12V PWM computer fans off of a USB power source. It boosts 5V or 9V USB-PD power to 12V and outputs a PWM control signal.
51 parts
2 layers120 × 100 mm
Inoovatest Sub
jcchincheong-bb/Verificationator_GP-WS25-26
Files for Group Project WS2526
115 parts
4 layers80 × 60 mm
Cm5-carrier
jl-grey-man/cm5-carrier
Minimal Raspberry Pi CM5 carrier board — USB-C, LiPo, HDMI, GPIO
48 parts
4 layers
FanCTRL
MuffinKing-jpeg/FanCTRL
Controlled board for PC fans, with mux capabilities. WIP
272 parts
8 layers50 × 50 mm
Stella Ignis
roquemt/STeYe
Flight computer for rockets
113 parts
4 layers40 × 50 mm
PMM-1.0-R1
sneakylizard123-4/PMM-1.0-R1
A breadboard friendly battery management module with charging, fuel gauging, and a switched 5V output.
74 parts
2 layers40 × 30 mm
Design files
zninjamonkey/3A-UPS-module
made for hack club half life in 1 week. cut me some slack
40 parts

Parts like it

TPS61089RNR
UncategorisedTexas Instruments

Questions

Is there a KiCad symbol and footprint for the TPS61089?

Yes. The symbol is Regulator_Switching:TPS61089 and the footprint Package_DFN_QFN:Texas_VQFN-RNR0011A-11, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the TPS61089?

Parts like it in the library: the TPS61089RNR by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS61089?

9 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.