MuffinKing-jpeg/DRP.004The QUACKer
DRP.004 is an open-source printed circuit board by MuffinKing-jpeg, from the MuffinKing-jpeg/DRP.004 repository on GitHub. It is a 4-layer board of 42 × 27 mm with 71 parts on 55 nets, routed with 271 tracks and 176 vias.
It is built around the TPS61022RWUR, TPD1E10B06DPYR and AP2112K-1.8, with the BQ24073RGTR, DTC143Z and 1N4148WS among its other parts. Its parts include 18 resistors, 16 capacitors, 7 ICs, 6 connectors and 4 diodes. It belongs with the STM32 boards of this library.
Quack with the new level!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C7, C10, C11, C14, C18 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R17, R18, R19, R22 |
| 5 | 3.3k | Resistor_SMD:R_0603_1608Metric | R5, R16, R20, R21, R23 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C5, C6, C17 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C8, C12 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric | R9, R10, R11 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D3, D4, D5 |
| 3 | TPD1E10B06DPYR | Muffin_SMD:X1SON-2_L1.0-W0.6-P0.65-BI | U2, U3, U4 |
| 2 | 1n | Capacitor_SMD:C_0603_1608Metric | C9, C16 |
| 2 | Conn_01x03_Pin | Connector_Muffin_THT.pretty:Molex_PicoBlade_53048-0310_1x03_P1.25mm_Horizontal | J5, J6 |
| 2 | DTC143Z | Muffin_SMD:SOT-523 | Q3, Q6 |
| 2 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2 |
| 2 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP7, TP8 |
| 1 | 1.1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1.5uh | Inductor_SMD:L_Changjiang_FTC322512S | L1 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10k NTC | Resistor_SMD:R_0402_1005Metric | TH1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AP2112K-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | BQ24073RGTR | Muffin_SMD:RGT16 | U1 |
| 1 | Conn_01x02_Pin | Connector_Muffin_THT.pretty:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Conn_01x03_Pin | Connector_Muffin_THT.pretty:PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x05_Pin | Connector_Muffin_THT.pretty:Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal | J4 |
| 1 | DMG1012T | Muffin_SMD:SOT-523 | Q4 |
| 1 | STM32G031G8Ux | Muffin_SMD:QFN-28_4x4mm_P0.5mm | U6 |
| 1 | SWCLK | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | SW_Push | Muffin_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW2 |
| 1 | SW_SPDT_SH | Muffin_SMD:MSK12C02 | SW1 |
| 1 | TPS61022RWUR | Muffin_SMD:DSJ14_2P85X1P58 | U5 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J2 |
| 1 | U_RX | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | U_TX | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | ~{NRST} | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
The 70 most common of 71 parts.
It measures 42 × 27 mm and has 4 copper layers, 1.6 mm thick.
71 parts, built around the TPS61022RWUR, TPD1E10B06DPYR, AP2112K-1.8 and BQ24073RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MuffinKing-jpeg/DRP.004 repository on GitHub, at the commit this page was made from: the board is DRP.004.kicad_pcb and its schematic DRP.004.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MuffinKing-jpeg before reusing the design.
NVIDIA-AI-IOT/jetbot_mini
While developing the schematic and layout designs, I used some footprints from SnapEDA; in order to avoid dealing with licensing issues, I will not redistribute those files on this Github and instead link to where you…
Guilleloma/Furby-GPT
This project transforms a 1998 Furby into an interactive and advanced desktop assistant using a Raspberry Pi W. It incorporates OpenAI and Whisper for natural language processing, primarily relying on Google Cloud Text…
chanulee/lovelace-ruler
LOVELACE PCB ruler: 55x25 mm reference ruler, KiCad + Figma silkscreen
ProccyBoi/kiku
kiku is an open-source portable audio player built around an STM32H523 microcontroller. The project combines Bluetooth audio, local microSD playback, FM radio, a colour display, headphone and speaker outputs, battery…