

Switched load module
- Size
- 60 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 24
- Pads
- 97
- Tracks, vias
- 129, 32
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 Jul 2022
- Updated
- 22 Aug 2026
Overview
Switched load module is an open-source printed circuit board by mtguerreiro, from the mtguerreiro/pcbs repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 60 × 55 mm with 38 parts on 24 nets, routed with 129 tracks and 32 vias.
It is built around the HFBR-2521Z, DGD0211CWT and BCW66H. Its parts include 16 resistors, 6 capacitors, 4 ICs, 4 diodes and 4 connectors.
Main components
3HFBR-2521Z
插件0℃~+70℃ 5MBd Multi-Purpose Fiber Optic Connection 插件 Fiber Optical Transceivers ROHSAVAGOFiber Optical TransceiversDGD0211CWT
TSOT-25-40℃~+125℃ 1 1.8A 1.9A 15ns 15ns 35ns 35ns 4.5V~18V 50uA IGBT、MOSFET Low Side TSOT-25 Gate Drivers ROHSDiodes IncorporatedGate DriversBCW66H
SOT-23-65℃~+150℃ 1 NPN 170MHz 20nA 330mW 5V 630 700mV 75V 800mA NPN SOT-23 Bipolar (BJT) ROHSLGEBipolar (BJT)
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C6 |
| 3 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R15, R16 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D3, D4 |
| 2 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R13 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 1k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R14 |
| 2 | 20R | Resistor_SMD:R_MELF_MMB-0207 | R10, R11 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J3 |
| 2 | DNP | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R12 |
| 2 | TBD | Resistor_THT:R_Axial_Power_L38.0mm_W9.0mm_P45.72mm | R8, R9 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 330nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | BCW66H | Package_TO_SOT_SMD:SOT-23W | Q1 |
| 1 | D | Diode_SMD:D_SMA | D2 |
| 1 | DGD0211C | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U4 |
| 1 | HFBR-2521Z | CL_Fiber_Optic:HFBR-2521Z | U3 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | PC817 | Package_DIP:DIP-4_W8.89mm_SMDSocket_LongPads | U1 |
| 1 | Q_NMOS_GDS | Package_TO_SOT_SMD:TO-252-2 | Q2 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x05 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal | J4 |
The 36 most common of 38 parts.
More from mtguerreiro/pcbs
12- 2 layers225 × 130 mm

- 2 layers116.8 × 77 mm

- 2 layers50 × 45 mm

- 2 layers40 × 130.5 mm

- 2 layers75 × 75.1 mm

- 2 layers38.8 × 63.7 mm

- 2 layers35 × 44.5 mm

- 2 layers65 × 60 mm

- 2 layers47.1 × 42 mm

- 2 layers32.1 × 35 mm

- 2 layers45 × 30 mm

- 2 layers78.6 × 50.9 mm

Similar boards
- 2 layers49 × 162.8 mm

- 4 layers294 × 143.9 mm

PMSM Driver
ssyps2/PMSM_Motor_FOC
A three-level 3-phase Diode Clamped Inverter, applied as a battery connected Permanent Magnet Synchronous Machine (2kW) drive.
290 parts5 - 2 layers245 × 127 mm

- 2 layers40 × 40 mm

RobustEEG Dongle
ppolGTMonster/RobustEEG_forUHFMRI
Hardware for an Open Source EEG usable in high magnetic Fields
9 parts1 - 2 layers85 × 115 mm

OSO BOOK C1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
38 parts8.1kCC-BY-SA-4.0 - 2 layers38.1 × 12.7 mm

- 2 layers136 × 84 mm

Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
38 parts915 - 2 layers126.4 × 15.2 mm

Questions
How big is the Switched load module PCB?
It measures 60 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Switched load module use?
38 parts, built around the HFBR-2521Z, DGD0211CWT and BCW66H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Switched load module KiCad files?
From the mtguerreiro/pcbs repository on GitHub, at the commit this page was made from: the board is switched-load-module/switched-load-module.kicad_pcb and its schematic adc-board-six-channels/adc-board-six-channels.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Switched load module design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).