
Yoga v2
mschwingen/hardware
Hardware designs by Michael Schwingen, michael at schwingen dot org

Hardware designs by Michael Schwingen, michael at schwingen dot org
Esp prog is an open-source printed circuit board by mschwingen, from the mschwingen/hardware repository on GitHub. It is a 2-layer board of 30.5 × 21.6 mm with 6 parts on 12 nets, routed with 37 tracks and 0 vias.
It is built around the BC547. Its parts include 2 resistors, 2 transistors and 2 connectors.

Similar to Analog Devices LB-013, this is a simple R-C-network that is useful when optimizing the loop compensation of switching regulators. I made this to use parts I had around (especially the 5-pin DIP switches), primarily because a nice PCB with silkscreen is a lot prettier than a bit of perfboard.
The PCB with all switches open has ca. 12pF of capacitance.
This is a KiCad design, however, there are PDFs and fabrication-ready gerber files in case you simply want to make your own.
This design is licensed under the CERN-OHL-S v2 license: https://ohwr.org/cern_ohl_s_v2.txt
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92 | Q1, Q2 |
| 1 | Conn_01x07_Female | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Horizontal | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |

mschwingen/hardware
Hardware designs by Michael Schwingen, michael at schwingen dot org

mschwingen/hardware
Hardware designs by Michael Schwingen, michael at schwingen dot org

mschwingen/hardware
Hardware designs by Michael Schwingen, michael at schwingen dot org

mschwingen/hardware
Hardware designs by Michael Schwingen, michael at schwingen dot org

mschwingen/hardware
Hardware designs by Michael Schwingen, michael at schwingen dot org

mschwingen/hardware
Hardware designs by Michael Schwingen, michael at schwingen dot org

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!



ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

It measures 30.5 × 21.6 mm and has 2 copper layers, 1.6 mm thick.
6 parts, built around the BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mschwingen/hardware repository on GitHub, at the commit this page was made from: the board is esp-prog/THT/esp-prog.kicad_pcb and its schematic USB-PD-Sniffer/USB-PD-Sniffer_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mschwingen before reusing the design.