Skip to the content
2 layersWAH Control, the printed circuit board in 3D

WAH Control

mrwillem/PCBs
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
10
Pads
45
Tracks, vias
21, 0
Routed
Yes
KiCad
KiCad 4
Created
13 Mar 2018
Updated
6 Mar 2021

Overview

WAH Control is an open-source printed circuit board by mrwillem, from the mrwillem/PCBs repository on GitHub. It is a 2-layer board with 12 parts on 10 nets, routed with 21 tracks and 0 vias.

It is built around the OPA1642AID and MAX4622CSE+. Its parts include 8 resistors, 2 ICs, 1 transistor and 1 inductor.

Main components

2

README

README.md

PCBs

Parts

12
QtyValueFootprintReferences
2RResistors_SMD_Addons:R_0603_HandSolderR7, R8
11K5Resistors_SMD_Addons:R_0603_HandSolderR4
122KResistors_SMD_Addons:R_0603_HandSolderR1
1390RResistors_SMD_Addons:R_0603_HandSolderR6
1470KResistors_SMD_Addons:R_0603_HandSolderR2
168KResistors_SMD_Addons:R_0603_HandSolderR3
182KResistors_SMD_Addons:R_0603_HandSolderR5
1LChoke_Radial_ThroughHole:Choke_Radial_27mm_2,8mm-Drills_CD_Bobin_Type_No1410311L1
1MAX4622Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mmU2
1OPA1642Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mmU1
1Q_NPN_BECTO_SOT_Packages_SMD:SOT-23Q1

More from mrwillem/PCBs

12

Similar boards

  • 2 layers129.8 × 82 mmUberamp1, the printed circuit board in 3D

    Uberamp1

    DeepSOIC/uberamp1

    8-channel tpa3255 amp with dsp (adau1701) and bluetooth (esp32)

    585 parts3
  • 2 layers61.4 × 110.6 mmIRONMix, the printed circuit board in 3D

    IRONMix

    VoltageFoundryMod/IRONMix

    Eurorack Line-level mixer and Headphone Output module in 4HP

    97 parts2MIT
  • 2 layers22 × 37.2 mmHydrophone preamp, the printed circuit board in 3D

    Hydrophone preamp

    starlingcode/piezo-preamp

    phantom powered piezotransducer preamplifier

    34 parts1
  • 4 layers60 × 46 mmAFE v1, the printed circuit board in 3D

    AFE v1

    auselia/afe_pcb

    The first acoustic emission (AE) front-end board of Auselia. It turns the charge of a piezoelectric sensor into 14-bit samples and a wake-up signal.

    167 parts
  • 2 layersOpenmic, the printed circuit board in 3D

    Openmic

    oliverpaddock/OpenMic

    An open source audio interface

    432 partsCERN-OHL-S-2.0
  • 2 layers84 × 52 mmModulo3-fv1, the printed circuit board in 3D

    Modulo3-fv1

    nodep/myAmp

    Battery powered, solid state, guitar amplifier schematic and PCB

    57 parts4GPL-3.0
  • 4 layers85 × 55 mmInputSel, the printed circuit board in 3D

    InputSel

    duanestorey/hifi-amplifier

    A Custom 5.1 LM3886 Based Custom Amplifier

    82 parts3

Questions

What parts does the WAH Control use?

12 parts, built around the OPA1642AID and MAX4622CSE+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the WAH Control KiCad files?

From the mrwillem/PCBs repository on GitHub, at the commit this page was made from: the board is WAH_Control/WAH_Control.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the WAH Control design in my own project?

Its repository states no licence, so its author keeps all rights: ask mrwillem before reusing the design.