

CAN SONIC WATERSENSOR
- Size
- 165.6 × 72.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 104
- Nets
- 74
- Pads
- 367
- Tracks, vias
- 1,108, 124
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2018
- Updated
- 6 Mar 2021
Overview
CAN SONIC WATERSENSOR is an open-source printed circuit board by mrwillem, from the mrwillem/PCBs repository on GitHub. It is a 4-layer board of 165.6 × 72.5 mm with 104 parts on 74 nets, routed with 1,108 tracks and 124 vias.
It is built around the STM32L433CCT6, TCAN330D and UCC27531D, with the BAS40-04-7-F, SISS71DN and ECS-2033-080-AU among its other parts. Its parts include 44 capacitors, 35 resistors, 8 ICs, 6 diodes and 5 connectors. It belongs with the STM32 boards of this library.
Main components
9STM32L433CCT6
LQFP-48(7x7)-40℃~+85℃ 1.71V~3.6V 12bit 12bit 256KB 32 Bit 38 64KB 80MHz ARM Cortex-M4 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TCAN330D
SOIC-8-40℃~+125℃ 1Mbps 20uA 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversUCC27531D
SOIC-8-40℃~+140℃ 1 1.8V~2.2V 10V~35V 10ns 15ns 17ns 17ns 2.5A 5A 800mV~1.2V IGBT、MOSFET Low Side Under Voltage Protection SOIC-8 Gate Drivers ROHSTexas InstrumentsGate DriversBAS40-04-7-F
SOT-23-55℃~+125℃ 1 Pair Series Connection 1V@40mA 200mA 200nA@30V 40V 600mA SOT-23 Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesSISS71DN
PowerPAK1212-8S-50℃~+150℃ 1 P-Channel 1.05nF 100V 2.5V 20nC@10V 20pF 23A 330pF 47mΩ@-10V、63mΩ@-4.5V 57W P-Channel PowerPAK1212-8S MOSFETs ROHSVishay IntertechnologyMOSFETsECS-2033-080-AU
SMD2520-4PCrystal OscillatorsECSFDN5618P
SOT-23-55℃~+150℃ 1 P-Channel 1.5W 1.6A 11.3nC@10V 17.9pF 2.6V 240mΩ@4.5V 444.2pF 60V SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsMPZ1005S600C
0402SMT Chip Bead for General Power Line (MPZ Series)TDKUncategorisedPMF63UNEX
SOT-323-55℃~+150℃ 1 N-channel 1V 2.2A 20V 289pF 395mW 42pF 5.85nC@4.5V 65mΩ@4.5V SOT-323 MOSFETs ROHSNexperiaMOSFETs
README
README.mdPCBs
Parts
104| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Resistors_SMD_Addons:R_0603_HandSolder | C24, C25, C26, C27, C28, C29, C43, C45, C46, C75 |
| 9 | 100R | Resistors_SMD_Addons:R_0603_HandSolder | R23, R26, R27, R29, R30, R31, R32, R33, R34 |
| 4 | 100 nF | Resistors_SMD_Addons:R_0603_HandSolder | C6, C8, C9, C18 |
| 4 | 1uF GRM219R71E105KA88D | Capacitors_SMD:C_0805 | C21, C22, C40, C53 |
| 3 | 10K | Resistors_SMD_Addons:R_0603_HandSolder | R3, R6, R13 |
| 3 | 4.7uF GRM31CR71H47 | Capacitors_SMD:C_1206 | C23, C73, C74 |
| 2 | 100R 1% | Resistors_SMD_Addons:R_0603_HandSolder | R12, R14 |
| 2 | 10nF 50V | Resistors_SMD_Addons:R_0603_HandSolder | C2, C5 |
| 2 | 10uF | Capacitors_SMD:C_0805 | C62, C63 |
| 2 | 110R | Resistors_SMD_Addons:R_0603_HandSolder | R9, R10 |
| 2 | 1K_1% | Resistors_SMD_Addons:R_0603_HandSolder | R18, R20 |
| 2 | 22pF | Resistors_SMD_Addons:R_0603_HandSolder | C19, C20 |
| 2 | 4,7uF | Capacitors_SMD:C_0805 | C13, C31 |
| 2 | 4.99M_1% | Resistors_SMD_Addons:R_0603_HandSolder | R15, R17 |
| 2 | 51pF 100V | Resistors_SMD_Addons:R_0603_HandSolder | C12, C14 |
| 2 | BAS40-04-7-F | TO_SOT_Packages_SMD:SOT-23 | D2, D3 |
| 2 | CONN_01X01 | Mounting_Holes:MountingHole_2.5mm | P5, P7 |
| 2 | SiSS71DN | Housings_SOIC_Addons:PowerPack1212-8S_Pitch0.65mm | SiSS71DN1, SiSS71DN3 |
| 1 | 0R | Resistors_SMD_Addons:R_0603_HandSolder | R8 |
| 1 | 0R_1% | Resistors_SMD_Addons:R_0603_HandSolder | R16 |
| 1 | 10 nF | Resistors_SMD_Addons:R_0603_HandSolder | C17 |
| 1 | 100 pF 100 V | Resistors_SMD_Addons:R_0603_HandSolder | C11 |
| 1 | 100K | Resistors_SMD_Addons:R_0603_HandSolder | R25 |
| 1 | 100nF | Capacitors_SMD:C_0805 | C51 |
| 1 | 100pF 60V | Capacitors_SMD:C_0805 | C15 |
| 1 | 10K | Resistors_SMD_Addons:R_0805_HandSolder | R7 |
| 1 | 10K_1% | Resistors_SMD_Addons:R_0603_HandSolder | R21 |
| 1 | 10R | Resistors_SMD_Addons:R_0805_HandSolder | R2 |
| 1 | 10nF | Capacitors_SMD:C_0805 | C41 |
| 1 | 12K | Resistors_SMD_Addons:R_0805_HandSolder | R5 |
| 1 | 1nF | Capacitors_SMD:C_0805 | C52 |
| 1 | 1uF | Capacitors_SMD:C_0805 | C4 |
| 1 | 1uF 0805ZC105KAT2A | Capacitors_SMD:C_0805 | C7 |
| 1 | 2,2uF | Capacitors_SMD:C_0805 | C32 |
| 1 | 220 pF | Resistors_SMD_Addons:R_0603_HandSolder | C10 |
| 1 | 22R 1% | Resistors_SMD_Addons:R_0603_HandSolder | R22 |
| 1 | 29K | Resistors_SMD_Addons:R_0805_HandSolder | R4 |
| 1 | 2K2 | Resistors_SMD_Addons:R_0603_HandSolder | R28 |
| 1 | 2nFC | Capacitors_SMD:C_0805 | C1 |
| 1 | 33uF | Capacitors_SMD:CP_Elec_6.3x7.7 | C16 |
| 1 | 365K | Resistors_SMD_Addons:R_0805_HandSolder | R24 |
| 1 | 470nF | Capacitors_SMD:C_0805 | C3 |
| 1 | 5.36K_1% | Resistors_SMD_Addons:R_0603_HandSolder | R19 |
| 1 | 51K 1% | Resistors_SMD_Addons:R_0603_HandSolder | R11 |
| 1 | 8MHz | Crystals_Addons:Crystal_SMD_EuroQuartz_MT-4pin_3.2x2.5mm_hand | U5 |
| 1 | BZG03C15TR | Diodes_SMD:SMA_Standard | D1 |
| 1 | CONN_01X04 | Connectors_Molex:Molex_NanoFit_2x02x2.50mm_Angled | J2 |
| 1 | CONN_5X2 | pin_header_1:Pin_Header_Straight_2x05_Pitch1.27mm | P1 |
| 1 | D_Schottky_x2_ACom_KKA | TO_SOT_Packages_SMD:SOT-23 | D10 |
| 1 | D_TVS | Diodes_SMD:SMA_Standard | D5 |
| 1 | ECS-2033-080-AU | Crystals_Addons:Crystal_SMD_ECS2025_Hand_Soldering | Y1 |
| 1 | FDN5618P | TO_SOT_Packages_SMD:SuperSOT-3 | Q2 |
| 1 | LED | LEDs:LED_0805 | D14 |
| 1 | LTC3245 | Housings_SSOP:MSOP-12-1EP_3x4mm_Pitch0.65mm | U3 |
| 1 | LTC4366-2 | Housings_SC:SOT23-8 | U1 |
| 1 | MPZ1005S600C | Resistors_SMD_Addons:R_0402_HandSoldering | L1 |
| 1 | PMF63UNE | TO_SOT_Packages_SMD:SOT-323_SC-70_Handsoldering | Q1 |
| 1 | R | Resistors_SMD_Addons:R_0805_HandSolder | R40 |
| 1 | R | Resistors_SMD_Addons:R_0603_HandSolder | R1 |
| 1 | RJHSE-5380-02 | Connect_Addons:RJHSE538X-02-noled | J1 |
| 1 | STM32L433CC | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U12 |
| 1 | TCAN330 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U14 |
| 1 | TDC10XX | Housings_SSOP:TSSOP-28_4.4x9.7mm_Pitch0.65mm | U6 |
| 1 | UCC27531 | TO_SOT_Packages_SMD:SOT-23-6 | U4 |
| 1 | USB-CMC-Wuerth | SMD-CMC-Wuerth:CMC-SMD-Wuerth | U10 |
More from mrwillem/PCBs
12- 4 layers

- 4 layers91 × 100 mm

- 2 layers

- 6 layers100 × 95 mm

- 4 layers92 × 98 mm

- 4 layers92 × 98 mm

- 2 layers173 × 114 mm

- 4 layers79 × 80.5 mm

- 4 layers126.2 × 94 mm

- 2 layers100 × 105 mm

- 4 layers

- 4 layers100 × 59 mm

Similar boards
- 4 layers65 × 35 mm

FlexiBMS
SimosMCmuffin/FlexiBMS_hardware
Open Source BMS developed by Simo Sihvonen (Simos MCmuffin) with the Esk8 community, for the Esk8 community
209 parts14 - 4 layers96.6 × 40.7 mm

- 4 layers50 × 58.5 mm

- 2 layers86 × 31 mm

- 2 layers99.1 × 99.1 mm

- 2 layers130 × 30 mm

Wordclock2
mad73923/wordclock2PCB_mechanics
Wall-mount clock which shows the clock in words. incl. WIFI for weather information, Twitter, E-Mails etc
60 parts1 - 4 layers52.9 × 70.7 mm

Solution design
featherfly12/speaker-pcb
In this github, there is a pcb design that has a total of 1 song! Download the KiCAD/PCB files in JLCPCB for the design schematic and files! Download the .zip files in firmware/media for the code! Once you've soldered…
56 parts - 4 layers50 × 92 mm

Questions
How big is the CAN SONIC WATERSENSOR PCB?
It measures 165.6 × 72.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CAN SONIC WATERSENSOR use?
104 parts, built around the STM32L433CCT6, TCAN330D, UCC27531D and BAS40-04-7-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CAN SONIC WATERSENSOR KiCad files?
From the mrwillem/PCBs repository on GitHub, at the commit this page was made from: the board is CAN_SONIC_WATERSENSOR/CAN_SONIC_WATERSENSOR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CAN SONIC WATERSENSOR design in my own project?
Its repository states no licence, so its author keeps all rights: ask mrwillem before reusing the design.