Skip to the content
4 layers51 × 20 mmBTS7960 controller shield, the printed circuit board in 3D
Size
51 × 20 mm
Copper layers
4
Thickness
1.6 mm
Parts
2
Nets
8
Pads
16
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
6 Jan 2021
Updated
11 Feb 2021

Overview

BTS7960 controller shield is an open-source printed circuit board by mrozsebastian, from the mrozsebastian/BTS7960_controller_shield repository on GitHub, published under the MIT licence. It is a 4-layer board of 51 × 20 mm with 2 parts on 8 nets.

README

README.md

BTS7960_controller_shield

  • Dodać moduł BlackPill do schematu
  • Dodać złącza enkoderów (JST 2.54mm)
  • Sygnał z enkoderów ma przejść przez: sn74lvc7ad - dodać go na schemacie
  • Layout płytki

Parts

2
QtyValueFootprintReferences
2Conn_02x04_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ2, J4

Similar boards

  • 4 layers25 × 35 mmQfn csi underpad diff, the printed circuit board in 3D

    Qfn csi underpad diff

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    2 parts744MIT
  • 4 layers25.7 × 13 mmCpw test, the printed circuit board in 3D

    Cpw test

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    2 parts205
  • 4 layers54 × 16 mmBnc test, the printed circuit board in 3D

    Bnc test

    azonenberg/starshipraider

    Open hardware test equipment

    2 parts193BSD-3-Clause
  • 4 layers94 × 53.4 mmMegaProgrammer, the printed circuit board in 3D

    MegaProgrammer

    clydeshaffer/gametank

    design files for the gametank hardware implementation

    2 parts150
  • 4 layers90.2 × 55.9 mmArduinox86 486 shield, the printed circuit board in 3D

    Arduinox86 486 shield

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    2 parts114
  • 4 layers45.3 × 11.8 mmIdeswap, the printed circuit board in 3D

    Ideswap

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    2 parts87
  • 4 layers39.4 × 53.3 mmSAB To RPi, the printed circuit board in 3D

    SAB To RPi

    whollender/SuperAudioBoard

    High quality, 24-bit audio codec board for Teensy 3.x

    2 parts75
  • 4 layers99.7 × 13 mmE Field 10cm, the printed circuit board in 3D

    E Field 10cm

    imendizabal/Near-Field-Probes

    Open Source kit of Near Field Probes for Electromagnetic Compatibility (EMC) troubleshooting

    2 parts59GPL-3.0

Questions

How big is the BTS7960 controller shield PCB?

It measures 51 × 20 mm and has 4 copper layers, 1.6 mm thick.

What parts does the BTS7960 controller shield use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BTS7960 controller shield KiCad files?

From the mrozsebastian/BTS7960_controller_shield repository on GitHub, at the commit this page was made from: the board is BTS7960_controller_shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the BTS7960 controller shield design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).