Skip to the content
2 layers138.2 × 139.3 mmGraSPIntEx, the printed circuit board in 3D
Size
138.2 × 139.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
142
Nets
68
Pads
566
Tracks, vias
1,182, 295
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
25 Apr 2021
Updated
29 Dec 2021

Overview

GraSPIntEx is an open-source printed circuit board by mrkw-kzk, from the mrkw-kzk/GraSPIntEx repository on GitHub, published under the MIT licence. It is a 2-layer board of 138.2 × 139.3 mm with 142 parts on 68 nets, routed with 1,182 tracks and 295 vias.

Its parts include 104 diodes, 26 switches, 4 resistors, 2 ICs and 2 connectors.

README

README.md

Gra&SP Int. Ex.

!!!! CAUTION !!!!

These files are not verified. Its silk is deliberately too little.

Use These

How to Make

Pin-1s and cathodes have silk dots. See the tweets: https://twitter.com/AEtheR3can/status/1475350572333400072?s=20

Parts

142
QtyValueFootprintReferences
52Dmy library:DD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +36
26SW_PUSHmy library:CherryMX_1u_rSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +10
26YS-SK6812MINI-Emy library:YS-SK6812MINI-ELED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +10
26YS-SK6812MINI-Emy library:YS-SK6812MINI-E_wo_edge_cutLED27, LED28, LED29, LED30, LED31, LED32, LED33, LED34, LED35, LED36, LED37, LED38, LED39, LED40, LED41, LED42 +10
4Rmy library:RR1, R2, R3, R4
2Qwiic Pro Micromy library:Qwiic_ProMicro_SMDU1, U2
2SolderJumper_3_Openmy library:SolderJumper-3JP1, JP2
14P4Cmy library:4P4C_SMDJ1
14P4Cmy library:4P4C_SMD_wo_holeJ2
1LOGOmy library:aetherG1
1LOGOmy library:graspG2

Similar boards

  • 2 layers316 × 119 mmTeensy Grovebox, the printed circuit board in 3D

    Teensy Grovebox

    jerry20091103/Teensy_Grovebox

    A portable synth and music multi-tool made with Teensy 4.1

    142 parts150MIT
  • 2 layers156 × 185.9 mmTorabo tsuki lp M, the printed circuit board in 3D

    Torabo tsuki lp M

    sekigon-gonnoc/torabo-tsuki-lp

    torabo-tsuki lp is low profile split keyboard with trackball(s)

    142 parts110
  • 2 layers167.6 × 97.5 mmAS3397 proto DIP, the printed circuit board in 3D

    AS3397 proto DIP

    PhysicsDptAngers/polyUAnalog

    Open source, analog and polyphonic synthesizer

    142 parts88MIT
  • 2 layers357.8 × 124.5 mmVic2020mainboard, the printed circuit board in 3D

    Vic2020mainboard

    danwerner21/vic2020

    A Vic-20 clone created with [almost] all readily available parts

    142 parts78
  • 2 layers144.8 × 88.9 mmPotentiostat, the printed circuit board in 3D

    Potentiostat

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    142 parts57CC-BY-4.0
  • 2 layers242.2 × 72.1 mmAtom47, the printed circuit board in 3D

    Atom47

    evyd13/atom47

    Replacement PCB for the Vortex Core

    142 parts30Apache-2.0
  • 2 layers285 × 94.6 mmNice60, the printed circuit board in 3D

    Nice60

    Nicell/nice60

    Pro Micro Powered, Hotswap 60% Keyboard

    142 parts29MIT
  • 2 layers304.8 × 95.3 mmKeybird, the printed circuit board in 3D

    Keybird

    fanf2/kbd

    my homemade keyboard projects

    142 parts22

Questions

How big is the GraSPIntEx PCB?

It measures 138.2 × 139.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the GraSPIntEx use?

142 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the GraSPIntEx KiCad files?

From the mrkw-kzk/GraSPIntEx repository on GitHub, at the commit this page was made from: the board is Gra&SP Int Ex/GraSPIntEx.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the GraSPIntEx design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).