11 layers74.2 × 29.2 mm
SolderingStationPCB
clytle374/Open-T12-Soldering-Station
This is a clone of the cheap T12 soldering stations, attempting to eliminate the shortfalls of the cheap designs.
68 parts43GPL-3.0
4 layers228 × 98 mm
Rp2040-led board schematics v01
MrFrangipane/ledboard-pcbLED Board - PCB
- Size
- 228 × 98 mm
- Copper layers
- 4
- Thickness
- 0.19 mm
- Parts
- 293
- Nets
- 162
- Pads
- 946
- Tracks, vias
- 1,347, 309
- Pours
- 67
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Jan 2024
- Updated
- 26 Feb 2024
Overview
Rp2040-led board schematics v01 is an open-source printed circuit board by MrFrangipane, from the MrFrangipane/ledboard-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 228 × 98 mm with 293 parts on 162 nets, routed with 1,347 tracks and 309 vias.
It is built around the ENC28J60-H, LMR50410Y5FQDBVRQ1 and MAX485EESA, with the AMS1117-5.0, AO3401A and NHD-0216AW-IB3 among its other parts. Its parts include 96 resistors, 72 capacitors, 27 ICs, 27 connectors and 2 switches. It belongs with the RP2040 boards of this library.
Main components
6ENC28J60-H
-ModulesOlimex Ltd.
LMR50410Y5FQDBVRQ1
SOT-23-6-40℃~+150℃@(TJ) 1 1A 2.1MHz 4V~36V 5V 80uA Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type Yes SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
MAX485EESA
UncategorisedMaxim Integrated Products
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsNHD-0216AW-IB3
-OLED DisplayNewhaven Display
README
README.mdLED Board - PCB
v1 January 2024
This project works with
- LED Board - Firmware minimal
- LED Board - Desktop minimal
- LED Board - Firmware full
- LED Board - Desktop full
Main board
ArtNet to LED strips (x8 RS485 transmitters)
-
Raspberry Pi Pico
-
ENC28J60 SPI module
-
Front panel for screen, rotary encoder, push button
Receiver (x8)
RS485 to LED strip
Schematics
Gerbers
- Edge Cuts
- F Cu
- In1 Cu
- In2 Cu
- B Cu
- F Silkscreen
- B Silkscreen
- F Paste
- B Paste
- F Mask
- B Mask
Parts
293| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R11, R12, R17, R19, R21, R23, R24, R28, R29, R32, R33, R36, R37, R40 +24 |
| 37 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5, C17, C20, C22, C23, C26, C27, C33, C34, C35, C36, C37, C42, C45, C48, C49 +21 |
| 32 | 20K | Resistor_SMD:R_0402_1005Metric | R4, R14, R15, R16, R18, R20, R22, R25, R26, R30, R35, R38, R43, R47, R49, R61 +16 |
| 24 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C10, C12, C13, C14, C15, C19, C21, C24, C25, C29, C30, C31, C32 +8 |
| 22 | ~ | Library:mouse-bites-1x07-jlc | H3, H14, H15, H16, H17, H18, H19, H20, H21, H25, H26, H27, H28, H29, H30, H31 +6 |
| 16 | 120 | Resistor_SMD:R_0402_1005Metric | R3, R10, R13, R27, R31, R34, R39, R44, R48, R60, R64, R72, R75, R78, R84, R90 |
| 16 | MAX485EE | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7, U8, U9, U10, U11, U12, U13, U15, U16, U21, U22, U23, U24, U25, U26 |
| 10 | ~ | Frangitron:frangitron_logo_16mm | H13, H34, H35, H36, H37, H38, H39, H40, H41, H42 |
| 9 | 1-2 12V | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels | JP1, JP2, JP3, JP4, JP10, JP11, JP12, JP13, JP14 |
| 9 | 12V | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP5, JP6, JP7, JP8, JP9, JP15, JP16, JP17, JP18 |
| 8 | 10uF | Capacitor_SMD:C_0402_1005Metric | C4, C7, C8, C18, C28, C43, C44, C46 |
| 8 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U17, U29, U30, U31, U32, U33, U34, U35 |
| 8 | ReceiverData | Frangitron:ScrewTerminal_01x02_5.08_Amphenol | J11, J12, J13, J14, J23, J24, J25, J26 |
| 8 | ReceiverRS485 | Frangitron:ScrewTerminal_01x03_5.08_Amphenol | J1, J2, J3, J4, J15, J16, J17, J18 |
| 8 | Terminal | Frangitron:ScrewTerminal_01x03_5.08_Amphenol | J6, J7, J8, J10, J19, J20, J21, J22 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H10, H11, H12, H22, H23, H24 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R52, R53, R54, R56 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R55, R57, R58, R59 |
| 4 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FM1, FM2, FM3, FM4 |
| 4 | MountingHole | MountingHole:MountingHole_2mm | H1, H2, H32, H33 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C72 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C74 |
| 1 | 1A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 5.6mH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 600 @ 600Mhz | Inductor_SMD:L_0805_2012Metric | FB2 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Button | Frangitron:C&K_PushButtonSwitch_SPST_D6C90F2LFS | SW2 |
| 1 | ENC28J60 | Library:ENC28J60-SPI-Ethernet-Module | U27 |
| 1 | FrontPanel | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J9 |
| 1 | LMR50410Y5FQDBVRQ1 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | MainBoard | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J27 |
| 1 | NHD-0216AW-IB3 | Frangitron:NewHaven-OLED-NHD-0216AW-IB3 | DS1 |
| 1 | PEC16 | SamacSys_Parts:PEC164120FS0012 | SW1 |
| 1 | PWR_IN | Frangitron:ScrewTerminal_01x02_5.08_Amphenol | J5 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U14 |
Questions
How big is the Rp2040-led board schematics v01 PCB?
It measures 228 × 98 mm and has 4 copper layers, 0.19 mm thick.
What parts does the Rp2040-led board schematics v01 use?
293 parts, built around the ENC28J60-H, LMR50410Y5FQDBVRQ1, MAX485EESA and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rp2040-led board schematics v01 KiCad files?
From the MrFrangipane/ledboard-pcb repository on GitHub, at the commit this page was made from: the board is rp2040-led-board-schematics-v01.kicad_pcb and its schematic Receiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rp2040-led board schematics v01 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers46 × 110 mm
Aware01 h7 rev2 0
95lux/aware01
Aarebot is a dynamic realtime sampler built as a Eurorack module. At its core is a stereo tape-style engine with a hot-swapping record/playback buffer - this enables to record and play simultaneously.
158 parts15GPL-3.0 - 4 layers78 × 58 mm
Johnson node
ManchesterStingerMotorsports/johnson-node
Fully modular CAN node hardware and firmware libraries
108 parts2 - 4 layers88.9 × 44.5 mm
- 4 layers76.2 × 82.6 mm
- 4 layers120.7 × 57.2 mm
- 2 layers118 × 78 mm
- 2 layers99.4 × 54.2 mm
OhmSprint C V measurement PCB
pakiboj/OhmSprint-C-V-measurement-PCB
Za potrebe projekta izabran je ESP32-C2 mikrokontroler a merenje struje i napona radjeno je preko ATM90E26 mernog cipa. Slanje podataka uradjeno je pomocu WROOM-C2 cipa ugradjenog sa ESP kontrolerom.
88 parts