4 layers100 × 80 mm
2 layers34.3 × 48.3 mm
Cloudlight
MR-Addict/cloudlight1- Size
- 34.3 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 39
- Pads
- 92
- Tracks, vias
- 52, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Dec 2023
- Updated
- 25 Mar 2024
Overview
Cloudlight is an open-source printed circuit board by MR-Addict, from the MR-Addict/cloudlight repository on GitHub. It is a 2-layer board of 34.3 × 48.3 mm with 15 parts on 39 nets, routed with 52 tracks and 11 vias.
It is built around the ESP32-WROOM-32, AMS1117-3.3 and DC005. Its parts include 3 resistors, 3 ICs, 3 connectors, 2 capacitors and 2 switches. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DC005
插件-30℃~+70℃ 12V 2mm 500mA 6.3mm DC Power Jack Right Angle Plugin DC Power Connectors ROHSSHOU HANDC Power Connectors
README
README.mdCloudlight
这是一个模拟云彩闪烁物联网项目，使用了定制的 ESP32 开发板和 3D 打印的外壳。
项目功能
- 可动态修改 WiFi 的 SSID 和密码
- 有 OTA 功能，可以通过 HTTP 请求更新固件
- 有方便管理的 Web 界面，可以查看设备信息和控制设备
- 有完善的 RESTful API 接口，可以通过 HTTP 请求控制数目和亮度
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | DC005 | custom:DC005 | U1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U3 |
| 1 | G*** | kibuzzard-65742BE8 | kibuzzard-65742BE8 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SW_Push_EN | Button_Switch_SMD:SW_SPST_FSMSM | SW1 |
| 1 | SW_Push_RST | Button_Switch_SMD:SW_SPST_FSMSM | SW2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
Questions
How big is the Cloudlight PCB?
It measures 34.3 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cloudlight use?
15 parts, built around the ESP32-WROOM-32, AMS1117-3.3 and DC005. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cloudlight KiCad files?
From the MR-Addict/cloudlight repository on GitHub, at the commit this page was made from: the board is pcb/cloudlight.kicad_pcb and its schematic pcb/cloudlight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cloudlight design in my own project?
Its repository states no licence, so its author keeps all rights: ask MR-Addict before reusing the design.
Similar boards
- 2 layers100 × 65.9 mm
FCI SAMD51-Universal Controller
libertathiest/FCI-SAMD51-Universal-Controller
SAMD51 handheld controller for FCI flow meters: KiCad hardware, PlatformIO firmware, FreeCAD enclosure
101 parts - 2 layers116 × 26 mm
- 2 layers117.5 × 104.5 mm
Portero bot v2
Willis75/portero-bot-hardware
PCB design and ESP32 firmware for Portero Bot gate controller (Claustro4)
75 parts - 2 layers213 × 104 mm
- 2 layers90 × 76.5 mm
- 2 layers85 × 56 mm
- 2 layers62.2 × 30.5 mm
WLED ESP32 Controller
Hasenpups/WLED_ESP32_Controller
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
24 parts44