

Stm bob
STM Breakoutboard
- Size
- 140 × 140 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 125
- Nets
- 157
- Pads
- 506
- Tracks, vias
- 930, 129
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Dec 2023
- Updated
- 16 Oct 2024
Overview
Stm bob is an open-source printed circuit board by MountaineerGit, from the MountaineerGit/CNC_HW repository on GitHub. It is a 4-layer board of 140 × 140 mm with 125 parts on 157 nets, routed with 930 tracks and 129 vias.
It is built around the R-78E3.3-1.0, R-78E5.0-1.0 and LM358, with the LTV-817S, A-2004-2-4-LPS-N-R and IRF3205 among its other parts. Its parts include 35 resistors, 24 capacitors, 19 connectors, 12 ICs and 7 diodes. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
6R-78E3.3-1.0
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 3.3V 300uA 50mVp-p 6V~36V 7.5mm 850kHz 90% Short Circuit Protection、Automatic fault recovery Step-down type ±3% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesR-78E5.0-1.0
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 300uA 50mVp-p 5V 7.5mm 7V~36V 850kHz 94% Short Circuit Protection、Automatic fault recovery Step-down type ±3% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesLM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierLTV-817S
SMD-4P-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsA-2004-2-4-LPS-N-R
插件-40℃~+85℃ 1 Gold Non-LED Phosphor bronze Shielded 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAssmann WSW ComponentsEthernet Connectors / Modular Connectors (RJ45 RJ11)IRF3205
TO-220MOSFETsMinos
README
README.mdSTM32 breakoutboard for custom CNC machine
Parts
125| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 3k3 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R6, R8, R10, R12, R14, R17, R23, R31, R32, R33, R34 |
| 12 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 10 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5, R7, R9, R11, R13, R15, R28, R35 |
| 8 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U1, U2, U3, U4, U5, U6, U7, U10 |
| 7 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JGpio1, JlimA1, JlimX1, JlimY1, JlimY2, JlimZ1, JProbe1 |
| 6 | 10uF 100V MCC | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C2, C15, C16, C17, C18, C19 |
| 6 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9_GPIO1, J9_GPIO2, J9_GPIO3, J9_GPIO4, J10_GPIO1, JI2C1 |
| 5 | A-2004-2-4-LPS-N-R | A-2004-2-4-LPS-N-R_kicad:ASSMANN_A-2004-2-4-LPS-N-R | JAxisA1, JxAxis1, Jy1Axis1, Jy2Axis1, JzAxis1 |
| 5 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J3, J5, J6, JPvMaffel1 |
| 5 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4, D5, D6, D7 |
| 5 | PTXU0104QPWRQ1 | footprints:TSSOP_QPWRQ1_TEX | UAxisA1, UxAxis1, Uy1Axis1, Uy2Axis1, UzAxis1 |
| 4 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J7, JLaser12V1, JLaserPWM1 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11_GPIO1, J11_SPI1, J11_SPI2 |
| 3 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19, R20 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C21 |
| 2 | 10uF | Inductor_SMD:L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C22, C24 |
| 2 | 430 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R27 |
| 2 | 510 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29, R30 |
| 2 | L | footprints:IND_S-126-R_RCP | L1, L2 |
| 2 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8, U9 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 1 | 100k | spindle_poti_3296W_1_332LF:TRIM_3296W-1-332LF | RV1 |
| 1 | 10V | Diode_SMD:D_SOD-323_HandSoldering | D1 |
| 1 | 10pf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C23 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R26 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16 |
| 1 | C_Polarized | Capacitor_SMD:CP_Elec_8x10 | C20 |
| 1 | Conn_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal | J1 |
| 1 | D_Zener | Diode_SMD:Nexperia_CFP3_SOD-123W | D2 |
| 1 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q3 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad | H5 |
| 1 | NPN | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q1 |
| 1 | R-78E3.3-1.0 | Package_SIP:SIP3_11.6x8.5mm | U3V3+1 |
| 1 | R-78E5.0-1.0 | Package_SIP:SIP3_11.6x8.5mm | U5V+1 |
| 1 | STM32F4DISCOVERY | STM32F4DISCOVERY:MODULE_STM32F4DISCOVERY | TB1 |
Similar boards
- 2 layers220 × 125 mm

- 2 layers135.7 × 83 mm

- 2 layers213.4 × 71.1 mm

- 2 layers93.4 × 87.4 mm

- 2 layers100 × 90 mm

- 4 layers175 × 135 mm

- 2 layers

- 2 layers97.4 × 75 mm

ELV1
omerikinci/ELV1
Elektronik kör yük (electronic dummy load) cihazının ilk stabil versiyonu. 150 W ile sınırlandırılmış, 30 V / 10 A aralığını destekler.
141 parts
Questions
How big is the Stm bob PCB?
It measures 140 × 140 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Stm bob use?
125 parts, built around the R-78E3.3-1.0, R-78E5.0-1.0, LM358 and LTV-817S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm bob KiCad files?
From the MountaineerGit/CNC_HW repository on GitHub, at the commit this page was made from: the board is stm_bob.kicad_pcb and its schematic limit_switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm bob design in my own project?
Its repository states no licence, so its author keeps all rights: ask MountaineerGit before reusing the design.