

ESPhome greenhouse controller
- Size
- 135.7 × 83 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 102
- Pads
- 371
- Tracks, vias
- 1,014, 149
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 May 2024
- Updated
- 30 Mar 2026
Overview
ESPhome greenhouse controller is an open-source printed circuit board by kecajtop, from the kecajtop/ESPhome_greenhouse_controller repository on GitHub. It is a 2-layer board of 135.7 × 83 mm with 89 parts on 102 nets, routed with 1,014 tracks and 149 vias.
It is built around the R-78E3.3-1.0, LTV-817S and ULN2803A, with the AC0805FR-071K5L, AC0603FR-074K7L and SM4007 among its other parts. Its parts include 38 resistors, 18 ICs, 9 capacitors, 9 diodes and 8 switches. It belongs with the home automation and IoT boards of this library.
Main components
7R-78E3.3-1.0
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 3.3V 300uA 50mVp-p 6V~36V 7.5mm 850kHz 90% Short Circuit Protection、Automatic fault recovery Step-down type ±3% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesLTV-817S
SMD-4P-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysAC0805FR-071K5L
0805-55℃~+155℃ 1.5kΩ 125mW 150V Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountAC0603FR-074K7L
0603-55℃~+155℃ 100mW 4.7kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountSM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General PurposeGBU6D
GBU-50℃~+150℃@(Tj) 175A 1V@6A 200V 5uA@200V 6A Single-Phase Rectifier GBU Bridge Rectifiers ROHSDIOTECBridge Rectifiers
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | R0805_1.5k_1%_125mW_100PPM_AC | Resistor_SMD:R_0805_2012Metric | R11, R12, R13, R14, R17, R18, R19, R20, R23, R24, R25, R26, R33, R34, R35, R36 +4 |
| 16 | R0603_4.7k_1%_100mW_100PPM_AC | Resistor_SMD:R_0603_1608Metric | R3, R4, R9, R10, R15, R16, R21, R22, R29, R30, R31, R32, R37, R38, R39, R40 |
| 12 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U1, U6, U7, U8, U9, U10, U11, U12, U13, U15, U16, U17 |
| 8 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2, K3, K4, K5, K6, K7, K8 |
| 8 | SM4007 | Diode_SMD:D_MELF | D1, D2, D3, D4, D5, D6, D8, D9 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10 |
| 3 | Conn_01x05_Pin | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J2, J3, J4 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 50mR | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | EKM227M1HG1BRRSHP | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | INA237 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U3, U14 |
| 2 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | TCA9555DBR | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U2, U19 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C4 |
| 1 | GBU6D | Diode_THT:Diode_Bridge_Vishay_GBU | D7 |
| 1 | Polyfuse | Fuse:Fuse_Bourns_MF-RHT1100 | F2 |
| 1 | R-78E3.3-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U18 |
| 1 | ULN2803A | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U5 |
| 1 | ~ | kadex:ZD1008 | MOD1 |
Similar boards
- 2 layers100 × 83.3 mm

- 2 layers76 × 45 mm

Fuel center
andrew-c-tran/byteshift-fuel-center
Automotive-grade CAN module for fuel pressure, temperature and ethanol content. AEC-qualified parts, fail-safe protocol, JLCPCB-ready.
52 partsGPL-3.0 - 4 layers140 × 140 mm

- 2 layers100 × 83.3 mm

- 2 layers100 × 90 mm

- 2 layers100.5 × 83 mm

PicoLogger
WestianPKl/Logger_Dashboard
A full-stack IoT monitoring platform for collecting, visualizing, and managing environmental sensor data from distributed devices.
63 parts - 2 layers144.1 × 108.1 mm

- 2 layers39.6 × 99.1 mm

ESP32-Eurorack Audio
ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module
128 parts260
Questions
How big is the ESPhome greenhouse controller PCB?
It measures 135.7 × 83 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESPhome greenhouse controller use?
89 parts, built around the R-78E3.3-1.0, LTV-817S, ULN2803A and AC0805FR-071K5L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESPhome greenhouse controller KiCad files?
From the kecajtop/ESPhome_greenhouse_controller repository on GitHub, at the commit this page was made from: the board is pcb/ESPhome_greenhouse_controller.kicad_pcb and its schematic pcb/ESPhome_greenhouse_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESPhome greenhouse controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask kecajtop before reusing the design.