
RGB Mood Light V1
motiforge-labs/PCB-Design-Portfolio
Custom PCB projects designed in KiCad featuring ESP32 and embedded systems.

Custom PCB projects designed in KiCad featuring ESP32 and embedded systems.
ESP32 MacroPad Pro is an open-source printed circuit board by motiforge-labs, from the motiforge-labs/PCB-Design-Portfolio repository on GitHub. It is a 2-layer board of 80 × 100 mm with 26 parts on 57 nets, routed with 147 tracks and 10 vias.
It is built around the WS2812. Its parts include 8 capacitors, 6 diodes, 6 switches, 1 resistor and 1 IC. It belongs with the keyboards and input boards and the ESP32 and AVR (ATmega, ATtiny) boards of this library.
A compact RGB mood lighting PCB built around the Arduino Nano ESP32. The board drives multiple WS2812B addressable RGB LEDs while being powered through USB-C. Designed in KiCad, the project demonstrates clean schematic design, efficient PCB routing, proper power distribution, and successful ERC/DRC verification.
Features

| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C5, C6, C7, C8 |
| 6 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6 |
| 6 | WS2812 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | D1, D2, D3, D4, D5, D6 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Arduino_Nano_ESP32 | Module:Arduino_Nano | A1 |
| 1 | ER_OLEDM0.91_1x-I2C | Connector:FanPinHeader_1x04_P2.54mm_Vertical | U1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | STATUS_LED1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | RESET_BTN1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

motiforge-labs/PCB-Design-Portfolio
Custom PCB projects designed in KiCad featuring ESP32 and embedded systems.

motiforge-labs/PCB-Design-Portfolio
Custom PCB projects designed in KiCad featuring ESP32 and embedded systems.

zli117/CyberKeeb2040
Hardware design for a mechanical keyboard based on RP2040 that also has a Pi Zero onboard.

ryomuk/TangNanoDCJ11MEM
Memory system and UART implemented on Tang Nano 20K for DEC DCJ11 PDP-11 Processor


cherry-embedded/HSCanT-hardware
HSCanT is a USB to 4-channel CAN FD tool designed based on the HPM5321 chip.

Duckle29/Vitamins-included
This repo holds a variation of the lets split. This board requires no soldering



It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the motiforge-labs/PCB-Design-Portfolio repository on GitHub, at the commit this page was made from: the board is ESP32_MacroPad_Pro/ESP32_MacroPad_Pro.kicad_pcb and its schematic ESP32_MacroPad_Pro/ESP32_MacroPad_Pro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask motiforge-labs before reusing the design.