Skip to the content
2 layers34 × 58 mmFootswitch, the printed circuit board in 3D

Design for a guitar effects pedal using the Daisy and Pd

Size
34 × 58 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
15
Pads
35
Tracks, vias
56, 2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Feb 2024
Updated
4 Sep 2026

Overview

Footswitch is an open-source printed circuit board by motekulo, from the motekulo/prog1 repository on GitHub. It is a 2-layer board of 34 × 58 mm with 6 parts on 15 nets, routed with 56 tracks and 2 vias.

Its parts include 2 switches, 1 resistor, 1 diode and 1 connector. It belongs with the audio and music boards of this library.

README

README.md

Prog1

A guitar pedal that runs patches prototyped on a Daisy Pod.

ProgPedals is the site dedicated to this pedal, patches, and community.

Thanks

Videos

ProgPedals playlist

Roadmap

  • Prog2 - using the Daisy Seed2 DFM
  • ~~ Footswitch PCBs connected via IDC cable ~~
  • ~~ Better audio sockets ~~
  • ~~ SMD version as well as through hole. ~~

About me

I'm a musician/ lecturer - https://researchers.mq.edu.au/en/persons/denis-crowdy, https://codemusic.studio

Parts

6
QtyValueFootprintReferences
2SF12011F-0102-20R-M-050Library:0.7 footswitchesS1, S2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1Conn_02x05_Counter_ClockwiseConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ1
1LEDLED_THT:LED_D1.8mm_W3.3mm_H2.4mmD1
1~Library:0.7 footswitches - 3dpdt tayda3DPDT Footswitch1

More from motekulo/prog1

3
  • 2 layers54 × 60 mmPodal 1590b, the printed circuit board in 3D

    Podal 1590b

    motekulo/prog1

    Design for a guitar effects pedal using the Daisy and Pd

    56 parts15
  • 2 layers76 × 82 mmDaisyPodal, the printed circuit board in 3D

    DaisyPodal

    motekulo/prog1

    Design for a guitar effects pedal using the Daisy and Pd

    56 parts15
  • 2 layers59 × 75 mm125b, the printed circuit board in 3D

    125b

    motekulo/prog1

    Design for a guitar effects pedal using the Daisy and Pd

    50 parts15

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

How big is the Footswitch PCB?

It measures 34 × 58 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Footswitch use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Footswitch KiCad files?

From the motekulo/prog1 repository on GitHub, at the commit this page was made from: the board is hardware/footswitch/footswitch.kicad_pcb and its schematic hardware/125b/125b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Footswitch design in my own project?

Its repository states no licence, so its author keeps all rights: ask motekulo before reusing the design.