2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k
2 layers145 × 146 mm
MageV2
mosswg/mage_hardwareThe pcb designs for the mage keyboard.
- Size
- 145 × 146 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 72
- Pads
- 640
- Tracks, vias
- 1,147, 104
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Jan 2023
- Updated
- 26 May 2023
Overview
MageV2 is an open-source printed circuit board by mosswg, from the mosswg/mage_hardware repository on GitHub. It is a 2-layer board of 145 × 146 mm with 79 parts on 72 nets, routed with 1,147 tracks and 104 vias.
It is built around the MCP23017-E/SO. Its parts include 64 switches, 8 resistors, 5 ICs and 2 connectors. It belongs with the SAM D and SAM boards of this library.
Main components
1README
readme.mdMage Hardware
This project is out of date go check out the repo with both hardware and software
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | SW_MEC_5G | Switch_Keyboard_Kailh:SW_Kailh_Choc_V1V2_1.00u_SOS | SW33, SW34, SW35, SW36, SW37, SW38, SW39, SW40, SW41, SW42, SW43, SW44, SW45, SW46, SW47, SW48 +14 |
| 29 | SW_MEC_5G | Switch_Keyboard_Kailh:SW_Kailh_Choc_V1V2_1.00u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +13 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R7, R8 |
| 4 | 3K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R6 |
| 4 | MCP23017-E_SO | digikey-footprints:SOIC-28_W7.5mm | U1, U2, U4, U5 |
| 2 | AudioJack4 | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J1, J2 |
| 2 | SW_MEC_5G | Switch_Keyboard_Kailh:SW_Kailh_Choc_V1V2_1.50u_90deg_SOS | SW61, SW64 |
| 2 | SW_MEC_5G | Switch_Keyboard_Kailh:SW_Kailh_Choc_V1V2_1.50u_90deg | SW29, SW32 |
| 1 | SW_MEC_5G | Switch_Keyboard_Kailh:SW_Kailh_Choc_V1V2_1.50u | SW30 |
| 1 | SeeeduinoXIAO | Seeeduino XIAO KICAD:Seeeduino XIAO-MOUDLE14P-2.54-21X17.8MM | U3 |
Questions
How big is the MageV2 PCB?
It measures 145 × 146 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MageV2 use?
79 parts, built around the MCP23017-E/SO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MageV2 KiCad files?
From the mosswg/mage_hardware repository on GitHub, at the commit this page was made from: the board is MageV2/MageV2.kicad_pcb and its schematic MageV2/MageV2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MageV2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mosswg before reusing the design.
Similar boards
- 4 layers103.5 × 90.6 mm
- 4 layers82.5 × 82.5 mm
PVDX ADCS PMB
BrownSpaceEngineering/PVDX-ADCS-PMB
Avionics files related to ADCS and Perovskite schematics, pcb design, and documentation
114 parts1 - 4 layers100 × 100 mm
- 4 layers
- 2 layers109.5 × 119.5 mm
EngineData
techie66/EngineDataLogger-EngineData
Arduino code for SleepyPi that is attached to main datalogger. Reads engine sensors.
100 parts1GPL-2.0 - 2 layers95 × 95 mm
Front controls
techie66/EngineDataLogger-FrontControls
Arduino code for front controls device.
135 parts1GPL-2.0 - 4 layers131 × 89.5 mm
Mecha pico mcb
wubneh/MCTR260-pico-firmware
Raspberry Pi Pico W robot controller firmware for MCTR 260 Mechatronics Design. Dual-core BLE architecture with mecanum drive, stepper/DC motor support, and configurable motion profiles.
85 parts1MIT